Connecting Coaxial (Rf); Using Your Antenna Or Cable Tv; Using The Antenna Through Your Vcr - Vizio HDX20L User Manual

20” lcd television

Hide thumbs Also See for HDX20L:

Table of Contents

2.5 - Connecting Coaxial (RF)

There are several options for connecting your antenna or cable to your new 20L LCD TV - directly

to the TV or through your VCR. Based on your home theater configuration, you can decide which

option is the right one for you.

Installation:

1. Turn off the power to the LCD TV.

2. Connect the coaxial (RF) connector from your antenna or cable box to the ANT

connector on the side of your LCD TV.

3. Turn on the power to the LCD TV

4. Select TV using the INPUT button on the front of the LCD TV.

Note:

a) Make sure the antenna or cable TV is correctly grounded.

b) See page 22 for selecting the TV source within the OSD menus (antenna,

cable, HRC and IRC).

Installation:

1. Turn off the power to the LCD TV and VCR.

2. Connect the "Output to TV" (RF Out or Antenna Out) connector on the rear of your VCR

to the TV connector on the rear of your LCD TV.

3. Turn on the power to the LCD TV and VCR.

4. Select TV using the INPUT button on the front of the LCD TV.

5. Select Channel 3 or 4 to match the channel selected on the rear of your VCR.

Note:

a) If you have an off-air antenna or cable TV, connect the off-air antenna or TV

cable to the RF connector on the rear of your VCR.

b) Make sure the antenna or cable TV is correctly grounded.

Version - 2/21/2005

www.vizioce.com

Table of Contents