Adjusting The Product Tilt And Height - Samsung S34C65 V Series User Manual

Adjusting the Product Tilt and Height

― The color and shape of parts may differ from what is shown. Specifications are subject to change without
notice to improve quality.
-30.0° (±3.0°) ~ 30.0° (±3.0°)
-2.0° (±3.0°) ~ 20.0° (±3.0°)
• The product tilt and height can be adjusted.
• Hold the top center of the product and adjust the height carefully.
• When adjusting the stand height, you may hear a noise. This noise is generated because of the
ball inside the stand slides when the stand height is adjusted. It is a normal noise and not a
malfunction of the product.
120.0 mm (±5.0 mm)
Caution
• Grasp the left and right sides of the monitor and adjust the swivel.
• Grasp the center of the monitor and adjust the height.
• Do NOT hold the stand moving part with your hand when leveling the screen. Your hand may get
hurt.
• Do not put an object around the lower part of the product. The product or object may get damaged
when adjusting the product height.
After adjusting the product tilt and height, if the screen is not level, take the following actions.
• Hold the bezel at both side edges and adjust the monitor angle until the screen becomes level.
(Be careful not to directly hold the LCD display.)
• The monitor angle can be adjusted from -2° to +2°.
11