Husqvarna S 138C Operator's Manual page 13

safe work procedures must
be obeyed at all times. Do
a check of your R.C.D. each
time you use it.
• Immediately disconnect from
the mains if the power cord
is cut or the insulation is
damaged.
• Do not touch a cut or
damaged power cord until
the electrical supply is
disconnected.
• Do not repair a cut or
damaged power cord. Replace
it with a new one.
Safety instructions for
maintenance
WARNING: Read the
warning instructions that
follow before you use the
product.
• To prevent accidental
start during maintenance,
disconnect the power cord.
• Do the maintenance work
correctly to increase the
lifetime of the product
and decrease the risk of
accidents. Let an approved
service agent do the
professional repairs. Speak to
2368 - 002 -
your nearest service agent for
more information.
• Only do the maintenance
work written in this operator's
manual. More extensive work
must be done by an approved
service agent.
• To prevent injury, do not
remove or do modifications to
safety devices.
• Put on heavy duty gloves
when you use the dethatcher
equipment. The dethatcher
equipment is very sharp and
cuts can easily occur.
• Keep the tines on the
dethatcher equipment sharp
and clean for the best and
safest performance.
• Let your service agent
regularly examine the
product and make necessary
adjustments and repairs.
• Replace damaged, worn or
broken parts. Always use
original spare parts from the
manufacturer. Other spare
parts can cause damage to
the product and increase the
risk of accidents.
• Obey the instructions for how
to change accessories. Only
use accessories from the
manufacturer.
13