Table of Contents
Advertisement
Available languages
Available languages
INSTALLATION
Step 5: INSTALLATION
The extractor hood is designed to be
fitted to the kitchen ceiling or a rigid
suspended ceiling.
A
CAUTION:
Ensure that the minimum distance
between hotplate and extractor hood is 30"
for electric hotplates and 30" for gas hot-
plates.
1. Mark the centre point of the extractor
hood on the ceiling.
2. Using the template, mark screw
positions on the ceiling.
3. Drill 2x '/." @ holes and insert wall plugs
flush with the ceiling.
Note: At least one screw for the
mounting must be installed through a
stud.
te
7%
"
10
4, Determine the overall height of the
support frame.
~ This is the height of the ceiling, the
height of the base and the distance
Advertisement
Table of Contents
