Maintenance - DeWalt DW46RN Instruction Manual

English
8. Turn pressure up to operating level (not to exceed 120
psi) and use tool as normal.
9. Re-lubricate at least once daily.
10. Always drain the compressor tanks at least once a day.
Hot Weather Operation
Tool should operate normally. However, keep tool out of direct
sunlight as excessive heat can deteriorate bumpers, O-rings and
other rubber parts resulting in increased maintenance.

Maintenance


WARNING: To reduce the risk of serious personal
injury, turn unit off and remove the battery pack
before making any adjustments or removing/
installing attachments or accessories. An
accidental start-up can cause injury.
Your D WALT power tool has been designed to operate
e
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.

WARNING: Disconnect air line from tool, engage trigger
lock and remove fasteners from magazine before making
adjustments or personal injury may result.
Daily Maintenance Chart
ACTiOn
Lubricate tool Prevents failure
with 5-7 drops of O-rings.
of D WALT
e
Pneumatic Tool
Oil.
Drain Prevents
compressor accumulation
tanks and hoses of moisture in
daily. compressor and
nailer.
Clean canister, Permits smooth
feed piston area operation of
and contact trip magazine,
mechanism. reduces wear
and prevents
jams.
Before each use, Prevents jams,
check to insure leaks and
all screws, nuts premature failure
and fasteners of tool parts.
are tight and
undamaged.
10
WhY hOW
Insert drops into
air fitting on end
cap of tool.
Open petcocks or
other drain valves
on compressor
tanks. Allow any
accumulated
water to drain
from hoses.
Blow clean with
compressor
air. The use of
oils, lubricants
periodically or
solvents is not
recommended
as they tend to
attract debris.
Tighten loose
screws or other
fasteners using
the appropriate
hex wrench or
screwdriver.
Repairs
The charger and batteries are not serviceable. There are no
serviceable parts inside the charger or battery pack.

WARNING: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (including
brush inspection and replacement, when applicable)
should be performed by a factory service center or
an authorized service center. Always use identical
replacement parts.
Register Online
Thank you for your purchase. Register your product now for:
• WARRAnTY sERViCE: Registering your product will
help you obtain more efficient warranty service in case
there is a problem with your product.
• COnFiRMATiOn OF OWnERshiP: In case of
an insurance loss, such as fire, flood or theft, your
registration of ownership will serve as your proof
of purchase.
• FOR YOUR sAFETY: Registering your product will allow
us to contact you in the unlikely event a safety notification
is required under the Federal Consumer Safety Act.
Register online at www.dewalt.com/account-login.
Seven-Year Limited Warranty
For warranty terms, go to www.dewalt.com/support/
warranty.
To request a written copy of the warranty terms, contact:
Customer Service at D WALT Industrial Tool Co., 701 East
e
Joppa Road, Towson, MD 21286 or call 1-800-4-D
(1-800-433-9258).
lATin AMERiCA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
see country specific warranty information contained in
the packaging, call the local company or see website for
warranty information.
FREE WARning lABEl REPlACEMEnT: If your warning
labels become illegible or are missing, call 1-800-4-D
(1-800-433-9258) for a free replacement.
WALT
e
WALT
e