JVC AV-25VM1EN Operating Instructions Manual page 8

You can 1 delete unwanted d broadcast channels or change the +PR Channel number in
the EDIT menu. You can also turn channel skip ON or OFF, or set a station ID to a
broadcast channel.
How to edit PR channels
PR channel up/down button
Display button
Menu buttons
Picture/sound button
(Inside the door)
INSTALL button
OOo OI 59990
INSTALL YPR = at
INOTO G8 avs cesccnccacadeocersede sistas tesess senna pues ssouexevennavecsvansunconeuniys piaveaptuspeaeuees cescercaccerresersesennss
¢ When automatic setting is finished, the screen changes to the EDIT screen for PR channel
PRO1. To continue editing PR channels, proceed to step 4.
¢ For details on the frequency of broadcast channels, see "Broadcast Channel Frequency
Table" on page 16.
PTTTTITITITITIITITIITILIT LITT dealer
1. Press ©, (Install) button
to display the INSTALLATION
i EDIT
menu. | 74182.2MHz > PROS
INSTALLATION
PrLANGUAGE
"AUTO PROGRAM
MANUAL
EDIT
ego en: STORE. ere
(1): frequency of broadcast channel
[2 PR channel number
[3]: station ID
(4|: channel skip setting
| @
| @ @BENTER GQ:EXIT
2. Press or menu
button to select EDIT. Then,
press (@/?) (Picture/sound)
button to display the EDIT
menu. |
14
=
down) button to set the PR
channel number to PRO1.
The menu becomes the EDIT
menu for PR channel PRO1, and
the broadcast channel set to PRO1
is displayed on screen.
EDIT
r 48.2MHz > PRO
10
SKIP OFF
a @:DE .
| Sy° ep: STORE (3:EXIT
NGIO! cscsehicdccevntescetsause eau biccsuenatund
* To change the PROO (AV) setting, set
the PR channel number to 00 and
start editing.
4. Change the currently
displayed PR channel setting.
When leaving the setting as itis,
proceed to step 5.
@ To delete the broadcast
channel set to the current
PR channei:
Press numeric button
¢ The broadcast channel set to
the next PR channel is
displayed on screen.
NOC wide iaicscoaissienidiiian
« When you delete a broadcast
channel, each of the broadcast
channels set to PR channels following
that PR channel number are reset to
the previous PR channel.
SU seeSPSSSP TRA RASESEST ISO SH SH aaessSSASestasasshsseeese
@ To change the broadcast
channel set to the current
PR channel:
Press C=)or(+_) menu
button to select the desired
broadcast channel.
INOUO 2 diccesendasagterelaceiescscsessinteeseasseat
* Broadcast channels set to a PR
channel number smaller than the
current PR channel pumber cannot be
selected.
3. Press (PR channel up/
@ To turn the channel skip
setting of the current
broadcast channel ON or
OFF:
Press (A) or menu
button to select SKIP, and press
or (-F_) menu button
to turn the channel skip setting
ON or OFF.
NOTOS? eisocccdscsiccersseteccetiecestiniccations
* When you turn channel skip ON, the
PR channel can no longer be selected
by the PR channel up/down button.
° The channel skip and station iD
settings are set to broadcast
channels. These settings do not
change even if the PR channel
number of the broadcast channel is
changed.
PreeP CIPI rrr ei res
Hi To set the station ID to the
ls broadcast channel:
) Press (AQ) or (4) menu
button to select ID.
(2) Press menu button to
select the position for
entering the station ID.
¢ The colour of the selected
position changes.
(3) Repeatedly press (AQ) or
menu button to select
the ID letters.
(4) Press (+ _) button to move
the entry position forward.
¢ Pressing (_— ) button
sends the entry position
backward.
(5) Repeat steps (3) and (4) to
complete setting of the
station ID.
(6) Press (+ _) button to return
tolD. —
5. Press (@/+) (Picture/sound)
button to end setting of the
current PR channel.
>
<<
ND AO
fo Sy)
<<
=s
=_=
Mm im
ae
15
ea]