JVC AV-25VM1EN Operating Instructions Manual page 4

| PREPARATION :
Presetting PR ehennels 5 (Programmed channels):
To watch TV, you must first set the broadcast channels to the PR channels on your
TV.
¢ After you have set the PR channels, the PR channels can be edited. For details,
see page 14.
PRA channel up/down button
Display button
Menu buttons
Picture/sound button
| (Inside the door)
The channel is automatically set,
and the EDIT menu is displayed.
* To edit PR channels, see page
™ Automatic setting
(AUTO PROGRAM)
Broadcast channels that can be
received are automatically judged, and 14.
PR channels are set in order from low 4, Press &, (Display) button
frequency broadcast channels. twice. |
Automatic setting is handy as PR The setting is complete.
channels can pe easily.
NOLC! crcessssreccoonssecscssenccencescecvenserecss
1. Press
(Install)
¢ With automatic setting, a broadcast
button. INSTALL
channel cannot be set to PR channe!}
PROO (AV).
2. Press
or menu
To set a broadcast channel to PROO
(AV), set by manual setting or by
button to select AUTO editing a PR channel.
PROGRAM.
tassstnttssnrsnsnsnernnerneerrnesunteant
3. Press (Picture/sound)
button twice.
@ Manual ——
7.
2.
Press Pe) aL. (install)
button.
Press or menu
button to select MANUAL,
then press (Picture/
sound) button.
MANUAL
7511_.2MHz > PRO1
FINE
a
€,° @m:sTORE (©:EXIT
Press (PR channel up/
down) button to select PR
channel number.
Press ( — ) or(+_) menu
button to select the
frequency of the broadcast
channel.
Scanning is stopped automatically
when a broadcast is received.
Repeatedly press(_— ) or (+_)
menu button to scan until the
desired broadcast is received.
INOTOS vccisscccscceucckasadevsesczesuncsanasscte
¢ For details on the frequency of
broadcast channels, see "Broadcast
Channel Frequency Table" on page
16.
¢ [f the picture is not clear:
Press menu button to select
FINE.
Then press or (_) menu
button to fine-tune the channel.
5, Press (@7?) (Picture/sound)
button.
The on-screen display blinks once,
and the current settings are stored
as a PR channel.
Repeat steps 3 to 5 to store all
desired broadcast channels.
Press , (Display) button
twice.
The setting is complete.
>
<<
NO AS
cou
<<
=s
anh, omh
Tl
Zaz