Ecotechnics SUN ECK TWIN 12 User Manual page 73

9) Type the filter code and press ENTER to delete the alarm. If the filter code is not
available, call the Service Center:
10) Press ENTER to continue with vacuum check:
11) If leaks are detected the following screen will be displayed:
Check filter tightening and press ESC to restart the vacuum check.
12) After few minutes, if no leaks are detected the following screen will be displayed:
INSTRUCTIONS MANUAL
After changing the filter
Following the user manual,
Press ENTER
to insert the counter reset code
Reset service alarm
enter filter code
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Check leaks with vacuum
- CHANGE DRYER FILTER
WARNING!
LEAKS!
Press ESC to exit
-74-
DD/MM/YY XX:XX PM
ESC
ENTER
ESC
ENTER
ENTER
DD/MM/YY XX:XX PM
STOP
DD/MM/YY XX:XX PM
ESC