Table of Contents
Advertisement
Use the supplied cable to connect the camera to your computer, properly attach one end of the cable to digital port of the
digital camera, and the other end of the cable to the back of your computer.
For RS232 interface:
1 Plug one end of the serial cable into your computer COM port.
2 Connect the other end of the serial cable to the digital port of the camera.
3 Set the camera to
Mode
4 Turn on your camera.
For USB interface:
1 Plug one end of the USB cable into your computer USB port.
2 Connect the other end of the USB cable to the digital port of the camera.
3 Set the camera to
Mode
4 Turn on your camera.
The appropriate TWAIN driver and software are required in order to download images from the digital camera to your computer.
You need to install the TWAIN driver and software which comes with the included CD-ROM . It is implemented with auto-setup
program. Once you insert CD-ROM disk into the CD-ROM drive, the installation menu will pop-up. Otherwise, you still can run
"setup.exe" file in the root directory of CD-ROM drive.
To install camera driver and application software:
1 Insert the software CD-ROM disc into your CD-ROM drive.
2 The setup program will begin - simply follow the on-screen instructions to complete both the TWAIN driver and the image
application software installation.
3 Restart the computer.
The TWAIN drivers will only become effective after the system is rebooted.
Advertisement
Table of Contents
