Battery Used For Vivicam 3540 Camera - Vivitar Vivicam 3540 User Manual

Battery Used for Vivicam 3540 Camera

• To power up the unit, the 4xAAA alkaline batteries should be put in the battery
compartment.
• Turn the Power Switch to On. Press the Power button. The LED is on. The LCD will
turn on immediately.
• If the battery power is taken off, the internal memory is erased and the TV settings
will be reset to default.
Make sure it is power up by the battery before you connect it to the PC with the USB
cable.
When connected to USB, the unit will not go to standby mode. You can take photo or
movie with USB cable connected to the PC in order to save battery power.
You cannot take photo with the USB connected to the MAC unit.
The battery icon will blink if battery power is too low.
Please change to new alkaline batteries as soon as possible. Always upload the images to
the computer by the time the battery low icon is prompted.
Push off the battery door and place 4XAAA alkaline batteries in correct polarity.
5