Table of Contents
Advertisement
Mounting
Programme Menu
When installing the unit, the trussing or area of installation must be able to
hold 10 times the weight without any deformation. When installing the unit
must be secured with a secondary safety attach-ment, e.g. and appropriate
safety cable. Never stand directly below the unit when mounting, removing,
or servicing the unit.
Overhead mounting requires extensive experience, including calculat-ing
working load limits, installation material being used, and perodic safety
inspection of all installation material and unit. If you lack these qualifcations,
do not attempt the installation yourself.
The installaiton should be checked by a skilled person once a year.
The Inno Pocket Spot is fully operational in two different mounting positions,
hanging upside-down from a ceiling or set on a flat level surface. To avoid
internal damage to the unit, never mount the unit on its side as illustrated
above. Be sure this fxture is kept at least 0.5m away from any flammable
materials (decoration etc.). And you'd better use and install the supplied
safety cable as a safety measure to prevent accidental damage and/or injury
in the event the clamp fails (see next page).
ADDRESS
DMX Address
ADDRESS
CHANNEL
CHANNEL
Channels Mode
CHANNEL
CHANNEL
CHANNEL
DMX State
Manual Mode
Auto Mode
Fan Mode
15
3
001
512
03
04
07
08
11
DMX Hold
Blackout
Red
Green
Blue
000
255
White
000
Color
255
00
Strobe
20
01
speed
31
01
auto
10
studio
silient
full power
Advertisement
Table of Contents
