Table of Contents
Advertisement
Mounting
When installing the unit, the trussing or area of installation must be able to
hold 10 times the weight without any deformation. When installing the unit
must be secured with a secondary safety attach-ment, e.g. and appropriate
safety cable. Never stand directly below the unit when mounting, removing,
or servicing the unit.
Overhead mounting requires extensive experience, including calculat-ing
working load limits, installation material being used, and perodic safety
inspection of all installation material and unit. If you lack these qualifcations,
do not attempt the installation yourself.
The installaiton should be checked by a skilled person once a year.
The Inno Pocket Spot is fully operational in two different mounting positions,
hanging upside-down from a ceiling or set on a flat level surface. To avoid
internal damage to the unit, never mount the unit on its side as illustrated
above. Be sure this fxture is kept at least 0.5m away from any flammable
materials (decoration etc.). And you'd better use and install the supplied
safety cable as a safety measure to prevent accidental damage and/or injury
in the event the clamp fails (see next page).
15
Advertisement
Table of Contents
