Table of Contents
Advertisement
Flash Modes
The Flash Mode can only be set under Record Mode. There are 4 modes available: Auto, Red-
eye Reduction, Fill-in (On)and OFF. The default setting is AUTO. To change the setting, press
the Flash button a number of times until the desired one is selected.
Mode
Auto
Red-Eye Reduction
Fill-in
OFF
Self-Timer
The self-timer can only be set under Record Mode
To use the Self-Timer function, perform the following:
1. Press the Self-Timer button
2. Position the camera, frame your shot, and press the Shutter button.
3. After 10 seconds, an image is captured and the timer will turn itself off.
The Self-Timer is designed to count down for 10 seconds. In the first 7 seconds, the indicator
blinks at a rate relatively slow and then blinks rapidly for the last 3 seconds.
Viewing Image Information
Image information can be viewed on the LCD monitor during image playback. Toggle the LCD
button
until information appears on the LCD monitor.
Still Image
Image Information Off
1
1.Play mode
2.Image number
3.Image resolution
Icon
Description
Flash is enabled automatically in low light conditions
Pre-flash to reduce red eye effect
Flash is always enabled
Flash is always disabled
to activate the Self-timer.
Press
0007
2
.
Image Information On
1
button
13:02
5
2002.09.17
4
4.Date of image capture
5.Time of image capture
1280X1024
3
0007
2
17
Advertisement
Table of Contents
