Table of Contents
Advertisement
Viewing Still Image/ Video Clip
You can view still images /video clips stored in the camera's internal or
card memory on image LCD display. You can also connect the camera
to the TV monitor in this mode to playback the still images/video clips.
On Image LCD Display
1. Power on the camera.
2. Press the Mode button to select the Play mode
3. The latest captured image (or the starting scene of the latest
captured video clip) will be displayed on image LCD display.
4. Use the arrow buttons to go to the next or previous image/video clip.
5. For video clips only: press the shutter button to playback. Press the same button to pause /
resume.
On a TV Monitor
Television monitors can be used to playback still image or video clip.
1. Set the appropriate video output mode (NTSC/PAL) corresponding to your TV standard.
* From the SETUP,select VIDEO MODE.
2. Connect one end of the video cable to the video port of your camera.
3. Connect the other end of the video cable to the video port of your television.
4. Turn on the camera and TV.
5. Toggle the Mode button to select Play mode
6. Playback the recorded images the same way as you would playback them on image LCD
display.
Note:
The VIDEO OUT function is highly power consumptive. Hence, batteries may be consumed
sooner than normal.
Erasing Still Image /Video Clip
There are two ways to erase images:
Erase One and Erase All
Recorded images in memory card cannot be erased when it is write-protected.
To erase the pictures recorded in the SD card, make sure to insert the card before deletion.
To erase the pictures recorded in the camera (internal memory), do not insert any SD card or
the camera will not be able to read the internal data with an external memory card attached.
External memory (SD card) always has priority over internal memory - whenever a memory
card is inserted into the camera ,the camera will use the memory card for both capture and
playback.
as shown.
.
ERASE
ERASE ONE
ERASE ALL
15
Advertisement
Table of Contents
