Q U I C K S T A R; S E T U; Tu Rn I N G T H E P O W E R O N/ Of F; C H O O S I N G Y O U R S O U R C - La Boite Concept PR LINK User Manual

Table of Contents

Advertisement

Available languages

Available languages

QUICK START
S E t U p
You can take full advantage of PR LINK wherever you place the speaker in your room. Ideally,
the unit should have a wall behind it (10-15 cm) into reflect the bass and get a better rendering.
The audio system is designed to give you high-quality stereophonic listening and immersive
sound, whether you're sitting or standing close to the unit. As a result, the listener doesn't need
to be in a central position to enjoy optimal stereophonic sound, and multiple listeners can enjoy
stereophonic sound diffusion simultaneously. Furthermore, it is not necessary to place the PR LINK
symmetrically to the walls of the room.

tU RN I N G t H E p o W E R o N/ oF F

1. Insert the power cord into the power cable plug located at the back of the PR LINK.
2. Connect the power cord to the wall socket.
3. To turn the PR LINK on, switch on the ON / OFF button on the back of the speaker. The Blue-
tooth® LED will start blinking.
4. The PR LINK will automatically go into standby mode if you leave your device without a signal
for 20 minutes. The standby LED will be red. To wake up the device, press the control button or
play music from the last source used.
5. To turn the PR LINK in temporary «off» mode, press the control button until the LED turns off.
Press the button again to restart it. The USB charging ports will not continue to operate while the
PR LINK is in «off» mode.
6. To turn off the PR LINK completely, switch off the ON/OFF button on the back of your speaker.
All LED lights and the USB charging port power supply go out.
C H o o S I N G YoU R S oU R C E
1. Press the control knob to select your source and / or to switch between connected sources.
2. A lit LED indicates the source you have selected. Connection order (from left to right):
Bluetooth® AptX, Streamer Multi-Room, Auxiliary Jack 3.5mm, RCA, Optical, ARC.
42
So U R C E p AN E L A C CE SS
1. The top of the PR LINK has a magnetic trapdoor. Press the back of this (area shown in orange
below) to release it.
2. Remove it to gain access to the source panel, featuring various connectors such as ARC,
Optical, Auxiliary Jack 3.5mm, RCA, charging ports, streamer ESCAPE x LA BOITE CONCEPT.
43

Advertisement

Table of Contents
loading

Table of Contents