Switching Between Digital And Analog; Audio Input Mode; Enjoying The Digital Mediaport; (Dmport) - Sony STR-DH500 Operating Instructions Manual

Switchingbetween
digital andanalogaudio
(INPUT MODE)
When you connect components to both digital
and analog audio input jacks on the receiver,
you can fix the audio input mode to either of
them, or switch from one to the other,
depending on the type of material you intend
to watch.
1
2
Turn INPUT SELECTOR on the
receiver to select the input.
You can also use the input buttons on the
remote.
Press INPUT MODE repeatedly
on the receiver to select the
audio input mode.
The selected audio input mode appears on
the display.
• AUTO
Gives priority to digital audio signals
when there are both digital and analog
connections.
If there are no digital audio signals,
analog audio signals are selected.
• ANALOG
Specifies the analog audio signals input
to the AUDIO IN (L/R)jacks.
Notes
• Some audio input modes may not be set up
depending on the input.
• When the ANALOG DIRECT function is being
used, the audio input mode is set to "ANALOG"
automatically. You cannot select other modes.
Enjoying the DIGITAL
MEDIAPORT
(DMPORT)
The DIGITAL MEDIA PORT (DMPORT)
allows you to enjoy sound from a network
system such as a portable audio source or
computer.
By connecting a DIGITAL MEDIA PORT
adapter (not supplied), you can enjoy sound
from the connected component on the
receiver.
For details, refer to the operating instructions
supplied with the DIGITAL MEDIA PORT
adapter.
Notes
• Do not connect an adapter other than the DIGITAL
MEDIA PORT adapter.
• Before connecting cords, make sure to disconnect
the AC power cord
(mains lead).
• Do not connect or disconnect the DIGITAL
¢D
MEDIA PORTadapter while the receiver isturned "_
O
on.
• Depending on the DIGITAL MEDIA PORT ¢D
adapter, video output
may uot be
possible.
n,
o
• The DIGITAL MEDIA PORT adapters are :3
available for
purchase
depending on the area.
49us