4B: Connecting The Videocomponents - Sony STR-DH500 Operating Instructions Manual

4b: Connecting the videocomponents
This section describes how to connect your
video components to this receiver. Be%re you
begin, refer to "Component to be connected"
below for the pages which describe how to
connect each component.
Before connecting cords, make sure to
disconnect the AC power cord (mains lead).
After connecting all your components,
proceed to "5: Connecting the antennas
(aerials)" (page 22).
Component to be connected
Component Page
TV 15
With HDMI jack 18
DVD player 20
Satellite tuneffSet-top box 21
DVD recorder/VCR 22
The image quality depends on the connecting
jack. Refer to the illustration that follows.
Select the connection according to the jacks on
your components.
Y©
Digital Analog
High quality image
Note
Be sure to turn on the receiver when the video and
audio signals of a playback componeut are being
output to a TV via the receiver. Unless the power is
turned on, neither video nor audio signals will be
transmitted.
F,+
m,
¢gl
O.
17us