Sony BRAVIA KDL-65W5100 Operating Instructions Manual page 12

Shown with PC connection
Use the TV as a monitor for
your PC by connecting an
HD 15-HD 15 cable
connection as shown to the
right.
This TV can also be
connected to a PC with a
DVI or HDMI output.
(Refer to the supplied Quick
Setup Guide.)
HD15-HD15 cable
t _(analog RGB)
l Audio cable
(stereo mini plugs)
PC Input Signal Reference Chart
After connecting the PC to the T_ set the output signal from your PC according to the supported
resolutions and timings indicated below.
VGA 640 x 480 31.5 60 VGA
SVGA 800 x 600 37.9 60 VESA Guidelines
XGA 1,024 x 768 48.4 60 VESA Guidelines
WXGA 1,280 x 768 47.4 60 VESA
1,280 x 768 47.8 60 VESA
1,360 x 768 47.7 60 VESA
SXGA 1,280 x 1,024 64.0 60 VESA
HDTV".' 1,920 x 1,080 67.5 60 CEA-861*
• This TV's PC input does not support Sync on Green or Composite Sync.
• This TV's PC VGA input does not support interlaced signals.
• For the best picture quality, it is recommended to use the signals in the above chart. In plug and play, signals
with a 60 Hz vertical frequency will be detected automatically. (PC reboot may be necessary.)
* The 1080p timing when applied to the HDMI input will be treated as a video timing and not PC timing. This
affects Picture
settings
and Wide Mode
settings. To view PC content
set Scene Select to Graphics,
Wide Mode to Full, and Display Area to Full Pixel.
12