Advertisement
FRONT PANEL/CAMERA CONNECTOR SIDE
SWAG st
oro
cassette neconcen BR-S4IIE
FRONT
PANEL
@ AUDIO INPUT connectors (AUD-1/L, AUD-2/R)
Audio input connectors for Normal and Hi-Fi audio when
the AUDIO INPUT SELECT switch © or @ is set to LINE
for each channel.
@ AUDIO OUTPUT connectors (AUD-1/L, AUD-2/R)
The
audio signal
(Hi-Fi or Normal)
selected with the
AUDIO OUT select switch @ on the rear panel is output
via these connectors.
© AUD-1 (L) INPUT select switch
Selects
the input signal
(camera
or Line AUD-1/L
of
AUDIO IN connector @)} to be recorded.
© AUD.2 (R) INPUT select switch
Selects
the
input
signal
(camera
or Line AUD-2/R
of
AUDIO IN connector @) to be recorded.
@ AUD-1 (L) INPUT level select switch
Select -60 dB, -20 dB or +4 dB according to the level of
the AUD-1/L input signal.
@ AUD.2 (R) INPUT fevel select switch
Select -60 dB, -20 dB or +4 dB according to the level of
the AUD-2/R input signal.
Note ~60 dB: Audio recording from microphone.
-20/+4
dB:
Audio
recording from
VTR
or other
audio equipment,
@ AUDIO OUTPUT level select switch
Select -20 dB or -6 dB according to the level of the audio
output
signal. The level is switched
for both Left/Right
audio channels simultaneously.
CAMERA
CONNECTOR
SIDE
@ Camera connector (50-pin)
Connect
a video camera
equipped
with a 50-pin VTR
docking connector.
TOP PANEL
SEARCH:
EJECT
OSTOP
bre
TF
Ww OO OFF
@ UNLOCK/LOCK slide knob
Slide to UNLOCK
to open the control panel cover, Leave
it in the LOCK position in normal shooting operation.
@ AEF ON/OFF switch
Normally set this switch to ON. To re-set to OFF, loosen
the screw and remove the stopper plate. In the OFF posi-
tion,
the
preroll
function
is switched
off for prompt
response in recording, though the picture at the switching
point between pause and restart is distorted.
© A DUB button
To start audio dubbing,
press the PLAY
button while
holding the A DUB
button depressed. The A DUB and
PLAY
LED
indicators will light and the sound on the
normal audio-2 track will be replaced by new material.
@ REC button
To start recording
(video and audio}, press this button
together with the PLAY
button. To stop recording, press
the STOP button. When the REC button is pressed together
with PAUSE/STILL
button, the tape is rewound
for 1-3
seconds and stops in the Record-Pause mode
(Recording
Standby mode). Recording starts by pressing the camera's
trigger.
© PLAY button
Press to start playback. Press together with the REC button
for recording, and with the
A DUB button for audio dub-
bing.
@ PAUSE/STILL button
Press to stop the tape temporarily during recording or
playback. The PAUSE/STILL
LED
indicator will light.
When this button is pressed during recording, the tape is
rewound for 1.3 seconds and stops in the Record-Pause
mode (when AEF made is on}. When the PLAY button is
pressed, or triggered by the camera's start/stop bytton, the
tape starts running
and recording starts at the position
where the previous recording stopped. When this button is
pressed during playback, a still picture is obtained.
For
frame advance, press it repeatedly. To resume normal play-
back, press the PLAY button,
@ EJECT button
Press to lift the cassette housing. Functions only in the
Stop mode. To eject the cassette in any other mode, first
press the STOP button, then the EJECT button.
© STOP button
Press to stop the tape. When this button is pressed while
the tape is running, the LED indicator lights and the tape
is completely withdrawn
into the cassette. This state is
referred to as the Stop mode.
@ REW button
When the button is pressed in the Stop mode, the REW
LED indicator will light.
Pressing this button
in the Play on Still mode
enables
high-speed playback at about 9 times normal in the reverse
direction. During search the REW indicator wil! remain lit.
@ FF button
When
the button
is pressed in the Stop mode, the FF
LED indicator will light.
Pressing this button
in the Play on Still mode enables
high-speed playback at about 9 times normal in the for-
ward direction. During search the FF indicator will remain
lit.
Advertisement
