Table of Contents
Advertisement
1
DC-DC CHARGER
Charge your batteries with your alternator or with the sun. The charger comes with an inbuilt 25/40A
MPPT solar regulator which has been pre-wired to a dedicated solar Anderson input on the side of the
box. Compatible with LiFePO4, AGM, SLA, Gel, and Calcium batteries, it's the perfect addition to any
12V touring setup.
2
BATTERY MONITOR WITH 500A SHUNT
Get up-to-date information on your battery in an instant. The inbuilt battery monitor has a measure of
your battery's voltage, current draw, and state of charge as well as a temperature gauge and two timers
that track your battery's remaining charge and discharge time.
3
FUSE BOX
Easy to access fuses. Made to protect the panel's outputs, the fuse block contains six fuse ports, with an
additional two to hold your spares. There's also an LED indicator that lights up when a fuse has blown.
4
BACKLIT ROCKER SWITCHES
Take control of your 12V accessories. Designed to give you a quick DIY install for your hardwired
accessories, the switches are ideal for control of items such as lights, pumps, and fridges. Each switch is
backlit, and the kit comes with an array of adhesive emblems to make identifying your switches easy.
8
ANDERSON-STYLE PLUGS
The side of the box has two DC-DC ports – one as a dedicated solar input, the other, as a three-pin
Anderson-style plug used to hook into your alternator and ignition source.
CONSTRUCTION
Constructed using heavy-duty grey powder-coated aluminium, our 12V Control Hub is perfect for
mounting in the back of the canopy, in DIY camper trailer or van builds. The box is easy to mount:
simply use the pre-drilled holes on the back of the unit to screw, rivet, or bolt it into place, to give you
convenient access to just about everything you need in your 12V setup. The system comes completely
fused and pre-wired, meaning all you've got to do is hook up your accessories.
COMPONENT OVERVIEW
OVERVIEW
4
Advertisement
Table of Contents
