Download Print this page
Seville Classics airLIFT OFF42630 Quick Assembly Instructions
Seville Classics airLIFT OFF42630 Quick Assembly Instructions

Seville Classics airLIFT OFF42630 Quick Assembly Instructions

24.5" pneumatic sit-stand mobile laptop computer desk cart

Advertisement

Quick Links

Use Instructions
Roll desk into desired position.
Lock casters to prevent the table from rolling.
To lift, pull up on the adjustment lever.
To lower, pull up on the adjustment lever while
pressing down on the table top.
Release adjustment lever to lock in height.
Safety
Do not tip the desk over or place upside down.
Do not place more than 35 lbs. on the desk top.
062019
STEP 5.
Align holes on BASE (D) with
COLUMN (A) making sure holes
for feet face upward.
Attach with LONG BOLTS (G)
through TOOTH WASHERS (J)
using 5 MM HEX KEY (N).
STEP 6.
Install LOCKING CASTERS (F) to
the open end of BASE (D) with
WRENCH (L).
Repeat for CASTERS (E) on the
opposite side.
Congratulations! Enjoy your new
Mobile Desk Cart!
Customer Service Information
Telephone: (800) 323-5565
Fax: (310) 533-3899
Hours: 8:30 AM – 4:30 PM (PST)
Email:
Support@SevilleClassics.com
Homepage:
www.SevilleClassics.com
24.5" Pneumatic Sit-Stand Mobile
Laptop Computer Desk Cart
Model: OFF42630, OFF42631
Thank you for choosing Seville Classics! We hope that you enjoy your new
mobile desk cart. Please read through this user guide for parts list, assembly
instructions, frequently asked questions and contact information.
062019

Advertisement

loading
Need help?

Need help?

Do you have a question about the airLIFT OFF42630 and is the answer not in the manual?

Questions and answers

Summary of Contents for Seville Classics airLIFT OFF42630

  • Page 1 Release adjustment lever to lock in height. Model: OFF42630, OFF42631 Safety Thank you for choosing Seville Classics! We hope that you enjoy your new Do not tip the desk over or place upside down. Do not place more than 35 lbs. on the desk top.
  • Page 2 Parts List Assembly Instructions STEP 1. Remove cap from COLUMN (A). H. Short bolt (11) A. Column (1) I. Screw (2) STEP 2. Align holes on MOUNT (B) with B. Mount (1) top of COLUMN (A). Attach with SHORT BOLTS (H) Tooth washer using 4 MM HEX KEY (M).

This manual is also suitable for:

Airlift off42631