Page 1
Technical Support and E-Warranty Certificate www.vevor.com/support DRAWER FRIDGE FREEZER USER MANUAL MODEL: BC-145WS / BC-145WD / BCD-145WD We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us.
Page 2
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
Warning-To reduce the risk of injury, user must read instructions manual carefully. SPECIFICATIONS BC-145WD BCD-145WD Model BC-145WS Voltage / AC115V 60Hz AC115V 60Hz AC115V 60Hz Frequency Amperage 1.0A 1.0A 1.0A Product Service Fridge Service Fridge Service Fridge Type Freezer Input Power 138L (UP:16 bottles...
IMPORTANT SAFETY RULES Before the appliance is used, it must be properly positioned and installed as described in this manual, so read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the appliance, follow basic precaution, including the following: ·...
Page 5
shelves in place so that children may not easily climb inside. Never allow children to operate, play with, or crawl inside the appliance. · · To ensure proper ventilation for your appliance, the front of the unit must be completely unobstructed. Choose a well-ventilated area with temperatures above 60°F (16°C) and below 90°F (32°C).
· The room for installing the appliance must be at least 1 cubic metre per 8 grams of refrigerant. The refrigerant quantity contained in this appliance is listed above in grams; it is also noted on the Rating Plate of the appliance. PARTS AND FEATURES BC-145WS & BCD-145WD - 5 -...
BC-145WD PREPARATION AND INSTALLATION Preparation — Allow 24 hours before switching on the refrigerator. During this time we recommend that you leave the door open to clear any residual odors. — The location you have selected for your refrigerator should: ·...
· Avoid locating the unit in moist areas, like a garage. — The unit should be placed where the ambient temperature is proper. If the temperature is above or below this range, it will affect the performance of the unit. Placing in cold or hot temperature conditions may cause cellar's temperatures fluctuating, and it will not reach the ideal one.
— “built-in” units draw air from right of ventilation frame and expel through left of ventilation frame under the front door. — “built-in” refrigerators and beverage centers have a power switch located on the control panel so power point location is not critical. —...
this appliance is equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the possibility of electrical shock. Do not under any circumstances cut or remove the third ground prong from the power cord supplied. For personal safety, this appliance must be properly grounded.
Plug in and switch on the refrigerator by pressing on the power button for a few seconds. When you use the refrigerator for the first time (or restart the refrigerator after having it shut off for a long time), there will be a few degrees variance between the temperature you have selected and the one indicated on the LED readout.
Page 12
· ℃/°F : Celsius ℃ / Fahrenheit °F Switch To control the temperature: BC-145WS: The up digital chamber indicates the setting temperature, ranging from 1℃~10℃(34℉-50℉),when temperature is set between 1℃~10℃,the indicator corresponding the chamber on the up side will flash. The digital tube on the down chamber indicates the actual temp inside the refrigerator, ranging from 0~37℃(32℉~99℉).
and work around setting temp within range of ± 2°. Under the circumstances of power stop or cutting in the process of normal operation, the last setting figure can be automatically memorized by the refrigerator. Light ON/OFF: There is a light on the top of refrigerator.The light is controlled by door pressure switch.
Factory setting temperature BC-145WS: Factory temperature set at 41℉ (5℃). BC-145WD: The factory temperature in the upper zone is set at 54℉ (12℃); The factory temperature in the lower zone is set at 41℉ (5℃). BCD-145WD: The factory temperature in the upper zone is set at 41℉ (5℃); The factory temperature in the lower zone is set at 5℉...
TROUBLESHOOTING GUIDE You can solve many common refrigerator problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling the servicer. PROBLEM CAUSE POSSIBLE The unit does Not plugged in.
Page 16
Support and E-Warranty Certificate ww.vevor.com/support...
Need help?
Do you have a question about the BC-145WS and is the answer not in the manual?
Questions and answers