Analog Output: 0–1 VDC.
Operator Controls: Power On/Off, Zero Adjustment; Pressure-units
Selector; Display Hold.
Display: 3-½ digit LCD with low battery indication.
Settling Time: 5 seconds.
Pressure Input Connection: ¼" ID flexible tubing.
Continuity Connection: ⅛" miniature banana jacks with test cable.
Analog Output Connection: 5-way miniature binding post (⅛").
Power Input Connection: IEC universal connector with cord.
Power Requirements: 120V, 50/60 Hz., 4W.
Battery Pack: Rechargeable nickel-cadmium.
Operating Time: 15 hours maximum from full charge.
Recharging Time: 16 hours maximum.
Media: Dry, clean gases that will not attack polyester, vinyl, silicone,
or silicone-based adhesives.
Case: Black, high-impact plastic with tilt handle.
1.3 UNPACKING
The shipping carton contains the following items:
• Model 6650 Digital Manometer
• AC cord set (P/N 27560)
• Transparent flexible vinyl tubing, ¼" ID, ⅜" OD, 10' length
(P/N 25781)
• 3-prong continuity test cord, 6' long (P/N 27636)
• Aspiration probe,12" (P/N 31309)
• Impact probe, 12" (P/N 31310)
• Instruction Manual DM-6650.xx
Confirm that each of these items is in the carton. If any item is
missing or damaged, please call Customer Service at (216) 398-
0330.
Instruction Manual DM-6650.02
4
Need help?
Do you have a question about the 6650 and is the answer not in the manual?