Attaching The Shoulder Harness - Makita UB402MP Original Instruction

Hold the blower upright by grabbing the handle of the
blower. Place the outlet of the blower on the gutter and
then turn on the blower.
Fig.23
For UX01G/GUX01 users
NOTICE:
When using the gutter nozzle set, if you
use UX01G/GUX01 as the power unit and install
BL4080F to UX01G/GUX01, do not use the shoul-
der harness included in the power unit package,
but use the recommended shoulder harness
shown below. For the recommended shoulder har-
ness, ask Makita Authorized Service Centers.

Attaching the shoulder harness

CAUTION:
Always use the shoulder harness
attached to the power unit. Before operation,
adjust the shoulder harness according to the user
size to prevent fatigue.
CAUTION:
Before operation, make sure that
the shoulder harness is properly attached to the
hanger on the power unit.
CAUTION:
Before operation, make sure that
the buckle of the shoulder harness is fastened
firmly.
CAUTION:
Always use the shoulder har-
ness shown below. Do not use other shoulder
harnesses.
1. Put on the shoulder harness and fasten the
buckle.
Fig.24
► 1. Buckle
NOTE: When removing the shoulder harness, unlock
the buckle and remove the shoulder harness.
2. Adjust the shoulder harness to a comfortable
working position.
Fig.25
3. Clasp the hook on the shoulder harness to the
hanger of the power unit.
1
Fig.26
► 1. Hook 2. Hanger
10 ENGLISH
2