Table of Contents
Advertisement
SERVICE MANUAL
MICROWAVE OVEN
GENERAL IMPORTANT INFORMATION
This Manual has been prepared to provide Sharp Corp. Service
engineers with Operation and Service Information.
It is recommended that service engineers carefully study the entire
text of this manual, so they will be qualified to render satisfactory
customer service.
Note:
The parts marked "*" are used in voltage more than 250V.
(Parts List)
All the parts marked "∆" on the parts list may cause undue
microwave exposure, by themselves, or when they are
damaged, loosened or removed.
Anm:
Delar märket med "*" har en spänning överstigande
250V.
Alla reservdelar som är märkta med "∆" i reservdelslistan
kan förorsaka omåtting mikrovågsstrålning, antingen i sig
själva, eller när de har blivit skadade, lösa eller.
Huom:
Huolto-ohjeeseen merkitty "tähdella" osat joissa jännite
on yli 250 V.
Kaikki varaosaluettelossa ∆:lla merkityt osat voivat
aiheuttaa asiaankuulumatonta mikroaaltosäteilyä; joko
sinällään, tai kun ne ovat rikki, löystyneet tai irroitettu.
Bemerk:
Deler som er merket "asterisk" er utsatt for spenninger
over 250V til jord.
Alle delene som er merkt med "∆" på del-listen kan
forårsake utstrakt mikrobølgestråling, og denne faren
øker når de er skadet, løsner eller fjernes.
Bemærk: "Dele mærket med stjerne benyttes med højere spænding
end 250 volt.
Alle delene mærket "∆" på delbetegnelsen på medføre
udsættelse for mikrobølger, af sig selv eller når de bliver
beskadigede, løsnede eller fjernet.
Never operate the oven until the following points are ensured.
(A) The door is tightly closed.
(B) The door brackets and hinges are not defective.
(C) The door packing is not damaged.
(D) The door is not deformed or warped.
(E) There is not any other visible damage with the oven.
Servicing and repair work must be carried out only by trained service
engineers.
SHARP CORPORATION
OSAKA, JAPAN
R5L16
WARNING
WARNING
PRODUCT SPECIFICATIONS
GENERAL INFORMATION
APPEARANCE VIEW
OPERATING SEQUENCE
FUNCTION OF IMPORTANT
COMPONENTS
SERVICING AND
TROUBLESHOOTING CHART
TEST PROCEDURE
COMPONENT
REPLACEMENT AND
ADJUSTMENT PROCEDURE
MICROWAVE MEASUREMENT
TEST DATA AT A GLANCE
WIRING DIAGRAM
PARTS LIST
1
R-5L16
Advertisement
Table of Contents
