•
EXAMPLE 3. FREQUENCY A
HP 5384A and HP 5385A
.!ji(i' .
Ope<ation and Programming "
The following example demonstrates how to display a Frequency A measurement on the controller display
screen. The address is set to 03 and the "IN" command is sent to the H P 5384A/H P 5385A. The response is read into
"A$", which is then displayed.
10
20
30
40
50
60
70
PROGRAM
REM
Example #3:
FREQUENCY A
5=703
OUTPUT S ;"IN"
ENTER S ; A$
DISP "FREQUENCY A =";A$[2]
GOTO 30
END
PROGRAM DESCRIPTION
Line 10
Remarks; comments only, does not affect the program.
Line 20
Set "S" equal to 703.
Line 30
Output "IN" command to HP 5384A/HP 5385A at address "S".
Line 40
Read HP 5384A/HP 5385A response into "A$".
"TAR3"
Line 50
Display "Frequency A="; followed by the contents of the second character onward of "A$".
Line 60
Go to line 30.
Line 70
End program execution.
•
EXAMPLE 4. REMOTE DISPLAY
•
The following example demonstrates how to send messages to the display of the counter. The program sets the
address to 03 then sends a message to the display of the counter.
10 REM
20 5=703
30 OUTPUT
40 END
PROGRAM
Example #4
REMOTE DISPLAY
S ;"DR
HP 5384A"
PROGRAM DESCRIPTION
Line 10
Remarks; comments only, does not affect the program.
Line 20
Set "S" equal to 703.
"TAR4"
Line 30
Send remote display message (HP 5384A/HP 5385A) to instrument at address "S".
Line 40
End program execution .
3-21