Table of Contents
Advertisement
In the EcoFlow app, click
party account.
Mounting Your PowerInsight
You can mount PowerInsight on a wall, place it on a tablet stand holder (not included
in the box), or simply hold it directly in your hand.
CAUTION
Mounting PowerInsight at a height of less than 59 in. (1.5 m) is
recommended. The wall bracket can only be mounted in landscape
orientation, as shown below.
The USB-C charger with at least 10W and the level are not included in the
box.
To mount PowerInsight:
1.
Mount the wall
bracket: Use the wall bracket to locate the holes, and make sure to
level them. Then, drill holes and insert anchors. Finally, place the bracket against
the wall and drive the screws through the bracket holes.
2.
Power
on: Plug one end of the power cable into any USB-C port on the bracket,
then plug the other end into the charger. After that, connect the charger to an
electrical outlet.
3.
Put PowerInsight onto the bracket.
when turned on, if it is securely mounted.
You can also view the step-by-step installation in the quick start guide provided.
Explore PowerInsight
+
>
Add devices
>
Add third-party devices
The PowerInsight screen will display "Charging"
to bind a third-
Advertisement
Table of Contents
Need help?
Do you have a question about the PowerInsight and is the answer not in the manual?
Questions and answers