EcoFlow PowerInsight Manual page 11

4. Anchors and screws (x4)
5. Quick Start Guide and Warranty Card
You may need a USB-C charger with at least 10W, but it is not included in the box.
Safety Instructions
DISCLAIMER
Read this document carefully before using the product to ensure that you completely
understand the product and can correctly use it. After reading this document, keep it
properly for future reference. Improper use of this product may cause serious injury to
yourself or others, or cause product damage and property loss. Once you use this
product, it is deemed that you understand, approve and accept all the terms and
content in this document. EcoFlow is not liable for any loss caused by the user's
failure to use this product in compliance with this document.
In compliance with laws and regulations, EcoFlow reserves the right to final
interpretation of this document and all documents related to this product. This
document is subject to changes (updates, revisions, or termination) without prior
notice. Please visit EcoFlow's official website to obtain the latest product information.
WARNING
1. Follow all instructions and pay attention to all warnings.
2. Do not dispose of the battery built in this product by throwing it into fire, a hot
oven, or mechanically crushing or cutting it, otherwise this can lead to an
explosion.
3. Do not leave the battery built in this product in an environment with extremely high
temperatures and low air pressure, otherwise this can potentially lead to an
explosion or the leakage of flammable liquid or gas.
4. Avoid using this product in extremely high or low temperatures, or in areas with low
air pressure such as high altitudes, during use, storage, or transportation.
5. Do not disassemble this product in any way or pierce the product with sharp
objects.
6. Please contact the manufacturer or retailer if this product does not function
normally or is damaged.
7. A risk of fire or explosion can occur if the battery is replaced with an incorrect
type.
CAUTION
1. The label is located on the rear surface of the product.
2. Only use attachments/accessories specified by the manufacturer.
3. Regulatory Compliance Information can be found in the Settings of the product.