6 | INDOOR UNIT INSTALLATION
C
Connecting point of
refrigerant pipe
(Liquid side ⌀A)
Connecting point of
refrigerant pipe
(Gas side ⌀B)
Table 4-2
Capacity
A
(kW)
2.2~2.8
⌀ 6.4
3.6~4.5
⌀ 6.4
5.6~8.0
⌀ 9.5
4.3 Version II Installation
For installation,follow the instructions set out below:
Remove the external casing,unscrewing the screws which secure it
■
to the unit.
6720866023 (2017/11)
Fig. 4-9
212
Fig. 4-10
B
C (mm)
⌀ 12.7
725
⌀ 12.7
925
⌀ 15.9
1225
Fig. 4-11
Fig. 4-12
Put the unit onto the feet, and fix it by screws.
■
1) Mark out the fixing points on the wall,either by marking through
■
the holes in the unit itself,or by referring to the measurements
given in Table 4-2.
2) Secure the unit by screwing the four fixing screws into suitable
masonry plugs. (Refer to Fig. 4-14).
4.4 Version II Installation
For installation,follow the instructions set out below:
1) Mark out the fixing points on the wall,either by marking through
■
the holes in the unit itself,or by referring to the measurements
given in Table 4-2.
2) Secure the unit by driving the four fixing screwing into suitable
masonry plugs.(Refer to Fig. 4-15).
ATTENTION
The figures above are based on model with 2.2kW~2.8kW type
as rated capacity, which may differ from the unit you purchased.
Fig. 4-13
Fig. 4-14
Fig. 4-15
Climate 5000 VRF