Bosch CLIMATE 5000 VRF CC-WT Installation & User Manual page 12

12 | THE OPERATING FLOW DESCRIPTION OF THE WEEKLY-TIMER CENTRAL CONTROLLER
8.6. How to set the function and relevant schedules of the weekly timer of the air conditioner?
1. Press
repeatedly to select "Single" and "All" alternately, displaying "Set";
if select "single", press
Press to select air conditioner to the next step.
2. Selecting "All" indicates to set the weekly timer schedules of all air conditioners, and "All" is
displayed. Selecting "Single" displays the address of the air conditioner;
for example, if the air conditioner whose address is 12 is selected, "12#" is displayed
3. Press
Press to select the day of the week to the next
4. Set the schedule of period 1, including shutdown time, startup time, running mode, Fan speed
and temperature. First of all, set the startup and shutdown time. Press
startup time and shutdown time. Press
Press to save the schedule of the period 1 to
5. Press
the cool, automatic or heat mode, press
is within 17 - 30 degree). Press
automatic speed,low Speed,middle speed and high speed
Press to save the schedule of the period 1 to
6. Finish the weekly timer schedule setting of the air conditioner within period 1 of the day of the
week.
7. Continually set periods 2, 3, 4 according to the above operation.
8. After finishing the setting of the periods, continually select the day of the week needed to be
set, to set the weekly timer parameter from Monday to Sunday, seven days in total.
Fig.8-6
6720862458 (2017/05)
Under the main interface
to enter the setting status interface of single air conditioner, press the button
to select a unit.
to select the day of the week
step.
Add
the next step.
to select running mode: automatic, cool, heat, Fan-only, Dry, or Off. If you select
Fan to regulate Fan speed, which can be selected among
the next step
Press to cancel the selection and return to the
Press to cancel the selection and return to the
to modify the startup and shutdown time.
Reduce
Press to cancel the set of period 1 and return
to adjust the temperature (the scope
Add Reduce
Press to cancel the set of period 1 and return
Finish setting
last step.
last step.
to select the
to the last step.
to the last step.
CLIMATE 5000 VRF