Visioneer RW120-WU User Manual page 60

3. Click the New button.
4. On the Scan Configuration Properties dialog box, type a name.
Type a new name for
the configuration.
Select the scan mode
and drag the slider to set
the resolution.
Drag the sliders to set
the Brightness and
Contrast.
Note: Depending on the destination application selected, the scan
configuration dialogue window may have a fourth tab for settings
specific to that destination.
text editing applications. Thus, you can create specific sets of scan
configurations for specific functions and they appear only when
appropriate.
If you want to start from the settings of another configuration,
select the configuration, then click the Copy button.
If the Scan Settings tab is not selected, click it.
Tip: If you're going to set up the new configuration to scan duplex
(two-sided), include that in the name, such as "Scan for Dark Print
(Duplex)," to remind you that it is a duplex scan.
S N O T
ELECTING EW NE OUCH
S S 55
CAN ETTINGS
If the configuration
is locked, click the
lock to unlock it.
The icon becomes a
key.
New configurations
are unlocked until
you manually lock
them.