Scanning Basics; Scan Using Autolaunch - Visioneer RW120-WU User Manual

22 V R
ISIONEER OAD
W S U
ARRIOR CANNER SER
S B
CANNING ASICS
Note: Always remove any staples or paper clips from documents
before inserting them into the scanner. Staples and paper clips can jam
the feed mechanism and scratch the internal components. Do not scan
any document with wet correction fluid, labels, stickers or Post-It™
notes on the pages. The correction fluid or glue from the stickers can
leave residue on the lens that is difficult to clean. The residue also
causes lines to occur in the scanned images. If a label, sticker or Post-It
note comes off during the scanning process, the item can get stuck in
the scanner and this will void your scanner's warranty.
S U A
CAN SING
When you insert an item into the scanner, it is automatically scanned
and the image is sent to a software application on your computer.
To scan using AutoLaunch:
1. Align a document with the Paper Guides and insert it, face down,
into the paper feed slot.
The scanner grabs the top edge of the paper and automatically
begins to scan and feed the paper through the scanner.
' G
S UIDE
L
UTO AUNCH