Samsung WF350AN Series User Manual page 32

troub ochoot ncj
nforrna_ on oodo,
High/Low voltage detected.
Ag+ Kit problem
Communication error between
AE SUB PBA and MAIN PBA
SF1 System error
SF2
SF3
When it finishes washing, "End"
and "SUDS" codes will blink in
turn.
Restart the cycle.
If the code reappears, call for service.
Call for service
Call for service
Call for service
To prevent it, cut down on detergents. Too many suds are detected
during the washing session.
The unit is put on hold until the
suds are reduced. Then, the unit
will go back to the operation.
For any codes not listed above, call 1-800-726-7864 (1-800-SAMSUNG)
32_ cycle chart
WF350AN-02833A EN.indd 32 2010-02-11 L._.,_.fl11:42:20