Sony Handycam CCD-TR99 Operation Manual page 8

Charging and Installing the Battery Pack
To Remove the Battery Pack
Slide the battery pack in the direction of the arrov\'.
Notes on charging the battery pack
• The POWER lamp will remain lit for a while even if the battery pack is removed and the power
cord is unplugged after charging the battery pack. This is normal.
• If the POWER lamp does not light, set the selector to VTR (DC OUT) and disconnect the power
cord. After about one minute, reconnect the AC power cord and set the selector to CHARGE again.
• You cannot operate the camcorder using the AC power adaptor while charging the battery pack.
8