Part 1: Installing Your Scanner; Installing To Ausb Port; Step 1: Installing The Paperport Software - Visioneer 6200 Installation Manual

Part 1: Installing Your
Scanner
I
NSTALLING TO A
This section of the guide contains instructions for connecting your
Visioneer scanner to a USB port. If you are connecting the 6400
scanner to a parallel port, see "Installing to a Parallel Port" on page 11
for more information.
STEP 1: I
NSTALLING THE
Note: You must install the PaperPort software before connecting the
scanner to the computer. Otherwise the correct software to run your
scanner will not be installed and it may not scan properly.
The PaperPort CD includes all the necessary installation files, as well as
PaperPort software files and other software files.
The CD also includes the PaperPort User's Guide. You can read the guide
from the CD, or print a copy directly from the CD.
To install the PaperPort software:
1. Start Microsoft Windows 98 and make sure that no other
applications are running.
Microsoft Windows 98 is required to connect the scanner to a USB
port.
2. Insert the PaperPort CD into your computer's CD-ROM drive.
The CD automatically starts.
I
NSTALLING TO A
USB P
ORT
P P S
APER ORT OFTWARE
USB P 5
ORT