Overview Of The Traction Pedal; Overview Of The Virtual Pedal Stop (Vps) Feature - Toro Reelmaster 5610-D Operator's Manual

Overview of the Traction Pedal

The traction pedal
reverse speed of the machine and the dynamic
braking when you return it to neutral.
• The further you push the traction pedal in
forward or reverse, the faster the machine
moves.
• To bring the machine to a smooth stop while
transporting or mowing, use your foot to return
the traction pedal to neutral at your desired
rate.
• To engage maximum braking, remove your foot from the traction pedal, allowing it to
return to neutral. The machine dynamically brakes to a stop.
This traction system allows you to customize the acceleration settings for operator comfort
and course conditions.

Overview of the Virtual Pedal Stop (VPS) Feature

The virtual pedal stop (VPS) feature allows you to temporarily set a maximum traction speed
that is less than the password-protected supervisor maximum traction speed.
To temporarily set the maximum speed of the machine, press the traction pedal fully
forward. You can set a separate speed for the mow range and transport range.
• To access this feature, press the up or down navigation button from the main screen.
Note:
is switched off.
• This feature allows you to customize the speed settings for your comfort level, or to
customize the speed settings to fit the application.
• Whenever the maximum traction speed is changed via the supervisor maximum speed
settings or Virtual Pedal Stop, the traction pedal is automatically reprogrammed to use
the full pedal stroke between neutral and the new maximum speed. This means the
operator gains more precise control of the traction speed at lower maximum speed
settings.
Operation: During Operation
controls the forward and
This feature reverts back to the supervisor maximum speed settings when the key
Indicates the maximum traction speed (pedal stop)
G439020
G462150s
This speed is locked out under the protected PIN
menu.
Page 5–14 3464-493 A