Table of Contents
Advertisement
870
A
19
Figure 2
4.8 Measurement setting
As shown in the figure, the "wavelength", "distance range", "pulse width" and "average time" can be set in the
"measurement setting" interface.
Wavelength selection
Setting of measurement parameters
The first is the wavelength, and the back check box is used to select the measurement wavelength. One, or both must
be selected. "Setting parameters" is used to set the "range", "pulse width" and "time" used in the current wavelength
measurement.
As shown in the figure, the "wavelength", "distance range", "pulse width" and "average time" can be set in the
"measurement setting" interface. For the three parameters of "distance range", "pulse width" and "average time", A870
series supports two setting methods by clicking on icons or numbers.
Advertisement
Table of Contents
