3. PIN DEFINITION
3.1 JP1
JP1 is the CMOS clear jumper, using a 1x2 pin with a 2.54mm pitch.
RTC1
Close
Open
3.2 AT/ATX2
AT/ATX is the jumper for selecting the power-on mode. When Pins 1-2 are closed, upon
powering up the supply, the board is on.
Pin 1-2, Close
Pin 2-3, Open
3.3 FP1
FP1 is the controller board interface, adopts 2x5Pin with 2mm pitch. Pin definition is shown
below:
PS_ON
Pin3
OPS-I5-1135G7 & OPS-I7-1165G7
Functions
Clear RTC CMOS
Default setting
Power-on Mode
AT power-on mode
ATX power-on mode
NC
7
User Manual