OPS-I5-1135G7 & OPS-I7-1165G7
User Manual
3.6 J2
PIN
Signal Name
PIN
Signal Name
PIN
Signal Name
1
CLK
2
GND
3
DATA
3.7 GPIO
2x5Pin, with a 2.00mm pitch, the pin definition is show below:
3.8 COM
Default JAE interface COM function. If it is switched to COM function on the board, 1-3 jumper should be
modified to 3-5, 2-4 jumper should be modified to 4-6.
9