Aiwa XR-M171 Operating Instructions Manual page 7

ADJUSTMENTS BEFORE OPERATIONS
DIMMER mode
Press DEMO/ECO during any function mode (CD,
TAPE, TUNER/BAND, AUX/VIDEO).
The display is dimmer than usual, press DEMO/ECO again to
restore normal display.
Power
Turning the unit on
Press POWER ® STANDBY/ON (POWER on the remote
control).
Or press TAPE, TUNER/BAND, AUX/VIDEO or CD, the
playback will start automatically if a disc or tape is inserted.
Turning the unit off
Press POWER ¢)STANDBY/ON again.
The unit goes into standby.
Volume
Turn VOLUME (Press VOL AA, on the remote
control).
Adjust from 0 (minimum) to 30 and MAX (maximum).
Tip:
Volume level setting is retained during power-off standby. If
the unit is turned off with the volume set to 21 or more, it is
automatically turned down to 20 the next time the unit is turned
on.
DEMO
If the clock has not been set, a DEMO appears on the display
when the unit is turned off.
To deactivate and activate the DEMO
Press DEMO/ECO when the unit is turned off.
ECO mode
Setting this unit to power economizing mode reduces power
consumption.
Press DEMO/ECO repeatedly (during power off) until
"ECO MODE" is displayed.
The display disappears and the POWER indicator lights up.
Reduces power consumption with the following operations, etc.
ECO ON mode (Only when the clock is set)
- The unit blacks out when the unit is turned off. Only the red
indicator lights up.
- If dimmer mode is set to on, the unit illumination brightens
(for 4 seconds) only when you operate the unit.
- When the unit turns on with the timer recording, the dimmer
mode is set to dimmest and the volume is set to minimum.