Maintenance And Cleaning - CYBEX gold LEMO Manual

MAINTENANCE AND CLEANING

• The user is responsible for the regular maintenance of the
product.
• Regularly inspect the assembly of this accessory.
• All connecting parts must be tight and secured properly.
• Re-tighten the screws regularly, preferably 1-2 weeks after
assembly of the chair. After that you should check on and
retighten the screws if necessary on a regular basis, e.g. every
one month .
• Use only original CYBEX replacement parts. It may be unsafe
to use substitutes.
• Do not make any modifications to the product.
• If you have any complaints or problems, please contact your
supplier or importer.
• Never store in a damp environment.
• Make sure that the anti-slip mats and wooden surfaces are dry
before placing them on the product. Please remove the mats
when the product is not in use.
• Clean the Learning Tower with a damp cloth and a mild
detergent and dry thoroughly.
• Do not use abrasives or ethanol-based products to clean
the chair.
• Remove water or other liquids immediately with a dry cloth.
• Do not expose to direct sunlight for drying.
*See user instructions
EN
7