Advertisement
OmySalon Electric Beauty Bed
Visit our website：www.omysalon.com
For missing parts or questions：email us at support@omysalon
SAFETY
To reduce risk of injury when assembling & using the chair, follow these
precautions:
OmySalon Electric Beauty Bed with Stool
• Read all of these instructions before assembling and using your salon chair.
• It is helpful to have 2 people assemble and turn the chair upright after
assembling.
• Do not over-extend the chair(0~150kg), creating the risk of falls or tipping the
chair, and its occupant over, resulting in injury
OTHER ITEMS YOU WILL NEED (not included)
• Hand Tools:Wrench,Rubber Mallet,Screwdriver (Phillips),Sturdy
Model: FESB-W
box
com
.
Advertisement
Table of Contents
Related Manuals for OmySalon FESB-W
Summary of Contents for OmySalon FESB-W
- Page 1 OmySalon Electric Beauty Bed Model: FESB-W Visit our website：www.omysalon.com For missing parts or questions：email us at support@omysalon SAFETY To reduce risk of injury when assembling & using the chair, follow these precautions: OmySalon Electric Beauty Bed with Stool • Read all of these instructions before assembling and using your salon chair.
- Page 2 PARTS & FEATURES with red point with yellow point...
- Page 3 PARTS & FEATURES 12x14 Open end wrench x1 M8x45 bolt x2 14x17 Open end wrench x1 gasket x8 6 mm wrench x1 M8x40 bolt x4 5 mm wrench x1 M10x45 bolt x4 M10x65 bolt x4 cable ties x3 M8x65 bolt x2 Foot column x4...
- Page 4 Installation instruction First：Install H to G Step 1: First install F on G Step 2: Fix H to G with 4 bolts Step 3: Remove the bolts pre-installed on the motor Step 4: Connect A and H to G Please follow the chart on the side M10X65 bolt Pay attention to the direction of motor installation...
- Page 5 Third: install N Step 1: Remove the preinstalled pins and cotter pins Step 2: Install the backrest Please follow the chart on the side Cotter pin Note: pin shaft is installed on one side first and then on the other side, which is convenient for installation Fourth: install Q and R Step 1：...
- Page 6 Fifth: install L C Yellow Point Motor air rod extension, sofa installation is convenient Step 1: Remove the pre-installed pins and cotter pins Step 2: Install L Step 3: Remove the motor premounting bolts Step 4: Connect the motor to the iron piece on L Please follow the chart on the side...
- Page 7 Seventh: Install M gasket Please follow the chart on the gasket side M8x65 bolt M8x45 bolt Eighth: Install handrails Please follow the chart on the side...
- Page 8 OPERATING THE CHAIR Lift the chair B The motor • Connect the power plug to the power supply A The motor • Press the Up button to lift Press the button to lower the C The motor chair to the desired height. •...
Need help?
Do you have a question about the FESB-W and is the answer not in the manual?
Questions and answers