Advertisement
Wooden Manicure Table
Instruction
(Model No. WMT-W)
Thank you for your purchase. If you have any problem, please feel free to contact us
by sending an email to support@Omysalon.com. We will work out an appropriate
solution for you asap. And your suggestions will be helpful for our future
improvement in product and service. (Please include order# in the email subject so
that we can get details about the order and the product you are inquiring about.)
Advertisement
Table of Contents
Related Manuals for OmySalon WMT-W
Summary of Contents for OmySalon WMT-W
- Page 1 Thank you for your purchase. If you have any problem, please feel free to contact us by sending an email to support@Omysalon.com. We will work out an appropriate solution for you asap. And your suggestions will be helpful for our future improvement in product and service.
- Page 2 PARTS A × 70 B × 70 C × 10 D × 5 E × 44 Ø15*12 M4*20 Ø7*35 M4*12 F × 4 G × 4 H × 4 I × 4 J× 2 K × 1 L × 1 M ×...
- Page 3 ASSEMBLY ILLUSTRATION Tip: 1.It is suggested not to fully tighten the screws and eccentric wheels until all the steps have been done and parts are installed correctly. 2.Tools that may be needed for assembly: screwdriver and power drill. 3.Drawer slides are kind of oily. If you want to keep your hands clean, you can wear gloves.
- Page 4 Step 2 Assemble Cabinet for Drawers Locate all the panels for the cabinet. Align the holes on the outer rails of the drawer slides with the holes on the side panels and then mount the outer rails to the side panels with screws.
- Page 5 Secure the dowels to the bottom panel. Align the dowels with the holes at the bottom of the side panels and back panel and push them into the holes. Put the eccentric wheels in the holes and tighten them. Then install the wheels to the bottom panel. Step 3 Assemble Cabinet Locate all the panels for the cabinet and insert dowels to the pre-inserted nuts on the panels first.
- Page 6 Secure the dowels to the bottom panel. Align the dowels with the holes at the bottom of the side panels and back panel and push them into the holes. Put the eccentric wheels in the holes and tighten them. Then install the wheels to the bottom panel. Step 4 Install Cabinet Door &...
Need help?
Do you have a question about the WMT-W and is the answer not in the manual?
Questions and answers