Advertisement
Wooden Manicure Table
Instruction
(Model No. WMT-SCW)
Thank you for your purchase. If you have any problem, please feel free to contact us
by sending an email to support@Omysalon.com. We will work out an appropriate
solution for you asap. And your suggestions will be helpful for our future
improvement in product and service. (Please include order# in the email subject so
that we can get details about the order and the product you are inquiring about.)
Advertisement
Table of Contents
Related Manuals for OmySalon WMT-SCW
Summary of Contents for OmySalon WMT-SCW
- Page 1 Thank you for your purchase. If you have any problem, please feel free to contact us by sending an email to support@Omysalon.com. We will work out an appropriate solution for you asap. And your suggestions will be helpful for our future improvement in product and service.
- Page 2 PARTS A × 46 B × 46 C × 3 D × 3 E × 32 Ø7*35 M4*20 Ø15*12 M4*12 F × 2 G × 1 H × 1 I × 4 J × 3 M10*30 Ø50*60 Ø50*763 K × 3 L ×...
- Page 3 ASSEMBLY ILLUSTRATION Tip: 1. It is suggested not to fully tighten the screws and eccentric wheels until all the steps have been done and parts are installed correctly. 2. Tools that may be needed for assembly: screwdriver and power drill. 3.
- Page 4 Step 2 Assemble the Cabinet Line up the holes on the outer rails of the drawer slides with the holes on the side panels and then mount the outer rails to the side panels with screws. Locate the side panels and back panel. Install the dowels to the pre-inserted nuts on the side panels.
- Page 5 Install dowels to the pre-inserted nuts on the top panel and the bottom panel and push the dowels into the holes on the side panels. Put the eccentric wheels into the holes on the side panels and tighten them. And then install the wheels to the bottom panel.
- Page 6 Step 3 Install the Supporting Tube Secure the metal plate to the bottom of the tabletop with screws. Turn the screw (Part I) to tighten part of the screw into the supporting tube first. Then put the screw into the hole on the bottom of the tabletop and turn the supporting tube to secure it to the tabletop.
Need help?
Do you have a question about the WMT-SCW and is the answer not in the manual?
Questions and answers