Installing Safe - Dometic MD310 Installation And Operating Manual

Installing safe

6.1 Control elements
No. in fig. 1,
Description
page 3
1 Display
2 Number keys
3 CLOSE button
4 CLEAR button
5 Lock for master key (behind cover)
6 Locking mechanism cover
7 Installing safe
7.1 Notes on installation
A
NOTICE!
The safe must only be installed by qualified specialists.
Observe the following instructions when installing:
• Carefully check the safe for damage once you have removed it from the
packaging. If there is visible damage, contact the manufacturer (see rear of safe
for addresses).
• Install the safe on a flat and even surface.
• Select a location for installation which is a sufficient distance from heat sources
(e.g. radiators). Avoid installing in locations with temperatures of under 0 °C and
over 45 °C.
• Avoid damp ambient conditions (e.g in the bathroom and swimming pool) in
order to avoid condensation forming in the device.
• Select a fastening material (screws with plugs, if necessary) which is appropriate
for the base.
8
MD310, MD390, MD450
Closes the safe lock after code is entered
Cancels the code entered
EN