Download Print this page
Philips SpeedPro Max XC7040 Instructions

Philips SpeedPro Max XC7040 Instructions

Advertisement

Quick Links

SpeedPro Max
XC7043, XC7040
2023 © Versuni Holding B.V.
PHILIPS and the Philips Shield Emblem
are registered trademarks of Koninklijke
Philips N.V. and are used under license.
This product has been manufactured
by and is sold under the responsibility
of Versuni Holding B.V., and Versuni
Holding B.V. is the warrantor in relation
to this product.
>75% recycled paper
642001001194 (06/2022)
>75% papier recyclé
1
2
3
4
5
6
2
1
English
Congratulations on your purchase and welcome to Philips! To fully
benefit from the support that Philips offers, register your product at
www.philips.com/MyVacuumCleaner.
Important safety information
Read this important information carefully before you use the appliance and its
accessories and save it for future reference. The accessories supplied may vary for
different products.
Danger
-
Never vacuum up water or any other liquid. Never vacuum up flammable
substances and do not vacuum up ashes until they are cold.
-
Never immerse the appliance or the adapter in water or any other liquid, nor
rinse it under the tap.
Warning
-
Check if the voltage indicated on the adapter corresponds to the local mains
voltage before you connect the appliance.
-
Always check the appliance before you use it. Do not use the appliance or
the adapter if it is damaged. Always replace a damaged part with one of the
original type.
-
The adapter contains a transformer. Do not cut off the adapter to replace it
with another plug, as this causes a hazardous situation.
-
This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
-
Always keep the magnetic charging disc away from very small children.
-
The plug must be removed from the socket-outlet before cleaning or
maintaining the appliance.
-
Unplug the adapter if you are not going to use the appliance for some time.
-
When storing the appliance for more than a month (without usage or
charging), make sure that the battery is charged to at least 50%. Storing
the appliance with an empty battery may lead to irreversible damage to the
battery.
-
Do not let the motorized nozzle move over the mains cords of other
appliances or other cables as this may cause a hazard.
-
Keep loose clothing, hair and body parts away from the motorized brushes.
-
Do not cover or block the ventilation openings when the appliance is
operating.
-
This vacuum cleaner is designed for household use only. Do not use this
vacuum cleaner to vacuum up building waste, cement dust, ashes, fine sand,
lime and similar substances. Never use the vacuum cleaner without any of
the filters. This could damage the motor and shorten the life of the vacuum
cleaner. Always clean all parts of the vacuum cleaner as shown in the user
manual. Do not clean any parts with water and/or cleaning agents if this is
not specifically shown in the user manual.
-
Only charge the appliance with the adapter supplied. Only use 25V adapter
ZD12D250050 or 30V adapter ZD12D300050.
-
Charge, use and store the product at a temperature between 5 °C and 40 °C.
-
Do not open, modify, pierce, damage or dismantle the product or battery to
prevent batteries from heating up or releasing toxic or hazardous substances.
Do not short-circuit, overcharge or reverse charge batteries.
-
Keep product and batteries away from fire and do not expose them to direct
sunlight or high temperatures.
-
If the product becomes abnormally hot or smelly, changes color or if charging
takes longer than usual, stop using and charging the product and contact
Philips.
-
Do not place products and their batteries in microwave ovens or on induction
cookers.
-
If batteries are damaged or leaking, avoid contact with the skin or eyes. If this
occurs, immediately rinse well with water and seek medical care.
-
This product contains a rechargeable battery. The battery may only be
replaced by a qualified service engineer.
-
Take the appliance to an authorized Philips service center when you can no
longer recharge it or when it runs out of power quickly.
-
To prevent damage, do not use the appliance if the filter is not present in the
dust container.
Caution
-
During charging, the adapter becomes warm to the touch. This is normal.
-
Do not plug in, unplug or operate the appliance with wet hands.
-
Do not remove the adapter from the wall socket by pulling at the cord (Fig. 1).
When you do not use the charging station for charging, always unplug the
appliance by first detaching the magnetic charging disc from the underside of
the appliance (Fig. 2).
-
Always switch off the appliance after use and before you charge it.
-
Never block the exhaust air openings during vacuuming.
-
Do not clean the dust container and the dust container lid in the dishwasher.
They are not dishwasher-proof.
-
Do not clean the white material of the filter with a normal vacuum cleaner or
a brush to avoid damage to the material.
-
Always use the vacuum cleaner with the filter assembled.
-
When you clean the washable sponge filter with water, make sure it is
completely dry before you put it back into the filter holder and dust container.
Do not dry the sponge filter in direct sunlight, on the radiator or in the tumble
dryer. Do not clean the filter holder with water. This part is not washable.
-
Replace the filter if it can no longer be cleaned properly or if it is damaged
(see ‚Ordering accessories').
-
Make sure that the appliance is installed with the charging station attached to
the wall according to the instructions in the user manual.
-
Never use any accessories or parts from other manufacturers or that Philips
does not specifically recommend. If you use such accessories or parts, your
warranty becomes invalid.
-
Be careful when you drill holes in the wall to attach the charging station, to
avoid the risk of electric shock.
Electromagnetic fields (EMF)
This Philips appliance complies with the applicable standards and regulations
regarding exposure to electromagnetic fields.
Ordering accessories
To buy accessories or spare parts, visit www.philips.com/parts-and-accessories
or go to your Philips dealer. You can also contact the Philips Consumer Care
Center in your country (see the international warranty leaflet for contact details).
Warranty and support
Versuni offers a two-year warranty after purchase on this product. This warranty
is not valid if a defect is due to incorrect use or poor maintenance. Our warranty
does not affect your rights under law as a consumer. For more information or for
invoking the warranty, please visit our website www.philips.com/support.
Recycling
-
This symbol means that electrical products and batteries shall not be disposed
of with normal household waste (Fig. 3).
-
Follow your country's rules for the separate collection of electrical products
and batteries.
Removal of built-in rechargeable battery
The built-in rechargeable battery must only be removed by a qualified
professional when the appliance is discarded. Before removing the battery, make
sure that the appliance is disconnected from the wall socket and that the battery
is completely empty.
Take any necessary safety precautions when you handle tools to open
the appliance and when you dispose of the rechargeable battery.
When you handle batteries, make sure that your hands, the product
and the batteries are dry.
To avoid accidental short-circuiting of batteries after removal, do not
let battery terminals come into contact with metal objects (e.g. coins,
hairpins, rings). Do not wrap batteries in aluminum foil. Tape battery
terminals or put batteries in a plastic bag before you discard them.
To remove the rechargeable battery, follow the instructions below.
1 Disconnect the appliance from the wall socket and let it run until the motor
stops.
2 Remove the dust container from the appliance (Fig. 4).
3 Undo the three screws that fix the battery holder to the housing of the
appliance (Fig. 5).
Pull the battery holder out of the appliance (Fig. 6).
Troubleshooting
This chapter summarizes the most common problems you could encounter
with the appliance. If you are unable to solve the problem with the information
below, visit www.philips.com/support for a list of frequently asked questions or
contact the Consumer Care Center in your country.
Problem
Possible cause
Solution
The appliance does
When the battery is
To charge the battery, connect
not work when I
empty, '00' flashes on
the appliance to the charging
push the button.
the display.
base or attach the handheld
vacuum cleaner directly to the
magnet on the charging base.
You have to push
Push the slider forward to
the slider forward
setting 1 to switch on. Increase
to switch on the
the suction power further by
appliance.
pushing the slider to setting 2 or
select the turbo setting to clean
very dirty patches at the highest
suction power.
The appliance
When there is a
Connect the appliance to the
2
1
suddenly stops
problem, the buttons
charging station or attach the
working.
will not respond and
handheld vacuum cleaner
the screen will remain
directly to the magnet on the
blank.
charging station. Check the
display. Once the appliance
starts charging, you may
continue to use the appliance as
usual. If an error code appears,
you can find its meaning in this
booklet (see 'Error codes').
The appliance has a
The filter and the
Clean the filter and the cyclone.
lower suction power
cyclone are dirty.
The filter light lights up after
than usual.
several hours of use to indicate
that you have to wash the
sponge filter. Make sure that
you wash the sponge filter at
least once a month if you use
the appliance regularly.
You have not attached
Make sure that you attach the
the dust container
dust container lid to the dust
lid properly to the
container and the dust container
dust container. You
to the appliance properly.
have not attached the
dust container to the
appliance properly. In
both cases, there will
be a loss of suction
power.
Dust escapes from
The filter is dirty.
Clean the filter.
the appliance.
The filter is not
Make sure that the filter is in
present in the
the appliance and assembled
appliance.
correctly.
Something blocks the
Check the cyclone for objects
cyclone.
stuck in it and remove any
object that blocks the cyclone.
If dust falls out of the
Empty the dust container and
dust container, the
attach the dust container lid
dust container lid is
correctly.
probably not attached
properly to the dust
container.
The appliance does
You selected a too
Reduce the suction power by
not move smoothly
high suction power.
choosing setting 1.
across the floor
when cleaning a
carpet.
The brush does not
The brush encounters
Clean the brush with a pair of
turn anymore.
too much resistance.
scissors or by hand.
The brush may stop
Switch off the appliance and
turning when it
then switch it back on again.
encounters too much
resistance from high-
pile carpet.
You have not installed
Follow the instructions in the
the roller brush in the
cleaning chapter of the user
nozzle properly after
manual to slide the roller brush
cleaning.
into the nozzle properly and
secure it inside the nozzle by
snapping home the locking
lever.
XC7043: The LEDs
You have not attached
Attach the nozzle to the
in the nozzle do not
the nozzle to the
appliance or handheld properly.
come on.
appliance or handheld
properly.
The appliance is not
The magnetic
Make sure that the magnetic
charging.
connector is not not
connector is connected properly
connected correctly
to the charging disk and that
to the charging disk
the adapter is inserted into the
or the adapter is not
wall socket properly.
inserted into the wall
socket properly.
You have not
Make sure that you use the
connected the correct
correct adapter and cord.
adapter and cord.
If you have checked the above
and the appliance still does not
charge, take it to a Philips service
center or contact the Consumer
Care Center.
Problem
Possible cause
Solution
XC7043: The
The roller brush is
Remove hairs from the brush
mini turbo brush
blocked.
with a pair of scissors (see user
does not function
manual).
properly.
The roller brush is
Keep the mini turbo brush
blocked by fabric
aligned with the surface and do
or surfaces during
not push the turbo brush into
cleaning.
soft surfaces.
The mini turbo brush
Make sure that the top and
is not fully closed.
bottom parts of the mini turbo
brush are properly connected
and there is no gap between the
two parts. Check if the locking
ring is in closed position (see
user manual).
When I use my
Your vacuum cleaner
Discharge the appliance by
vacuum cleaner
builds up static
frequently holding the tube
I sometimes feel
electricity. The lower
against other metal objects in
static electricity
the air humidity, the
the room (for example the legs
shocks.
more static electricity
of a table or chair, etc.). You can
the appliance builds
also raise the air humidity level
up.
in the room.
You vacuumed up
Empty the dust container and
fine sand, lime or a
clean the filter according to the
similar substance.
instructions in the user manual.
This also causes static
electricity.
Error codes
Error code
Meaning
E1
The appliance is stored or charged at a temperature below
5°C. Move the appliance to a warmer room. Do not store or
charge the appliance at a temperature below 5°C or above
40°C.
E4
The roller brush in the motorized floor nozzle or in the mini
turbo brush has become blocked and cannot turn freely.
Switch off the appliance and check the roller brush for
obstructions.
E6
No current passes through the adapter.Check if the adapter is
inserted into the wall socket properly. If the adapter is inserted
properly and the charging disk (magnet) is attached properly
and the appliance does not start to charge, the adapter may
be defective. In that case, please contact the Consumer Care
Center or take the appliance to an authorized Philips service
center.
E7
You use the wrong adapter. Connect the correct adapter.
If the correct adapter does not work, please contact the
Consumer Care Center or take the appliance to an authorized
Philips service center.
SE
Please take the appliance to an authorized Philips service
center.
Türkçe
Ürünümüzü satın aldığınız için teşekkür ederiz; Philips'e hoş geldiniz!
Philips'in sunduğu destekten tam olarak yararlanmak için ürününüzü
www.philips.com/MyVacuumCleaner adresinden kaydettirin.
Önemli güvenlik bilgileri
Cihazı ve aksesuarlarını kullanmadan önce bu önemli bilgileri dikkatlice okuyun
ve gelecekte başvurmak üzere saklayın. Cihazla birlikte verilen aksesuarlar
ürünlere göre farklılık gösterebilir.
Tehlike
-
Kesinlikle su veya başka bir sıvı çekmeyin. Yanıcı maddeleri kesinlikle
süpürmeyin. Sigara küllerini çekmeden soğumasını bekleyin.
-
Cihazı ya da adaptörü suya veya başka bir sıvıya daldırmayın ve musluk suyu
altında durulamayın.
Uyarı
-
Cihazı kullanmadan önce, adaptörün üzerinde belirtilen gerilimin ülkenizdeki
gerilimle uygunluğunu kontrol edin.
-
Cihazı kullanmadan önce her zaman kontrol edin. Hasar gören cihazı veya
adaptörü kullanmayın. Zarar görmüş bir parçayı mutlaka orijinaliyle değiştirin.
-
Adaptör içinde bir transformatör bulunur. Adaptörü kesip başka bir fişle
değiştirmeyin, aksi takdirde cihazı kullanmak tehlikeli hâle gelir.
-
Bu cihazın 8 yaşın üzerindeki çocuklar ve fiziksel, duyusal ya da zihinsel
becerileri gelişmemiş veya bilgisi ve tecrübesi olmayan kişiler tarafından
kullanımı sadece bu kişilerin nezaretinden sorumlu kişilerin bulunması
veya cihazın güvenli kullanım talimatlarının bu kişilere sağlanması ve
olası tehlikelerin anlatılması durumunda mümkündür. Çocuklar cihazla
oynamamalıdır. Temizlik ve kullanıcı bakımı gözetim olmadan çocuklar
tarafından yapılmamalıdır.
-
Manyetik şarj diskini her zaman küçük çocuklardan uzak tutun.
-
Cihazı temizlemeden veya cihazın bakımını yapmadan önce fişi prizden
çekilmelidir.
-
Cihazı bir süre kullanmayacaksanız adaptörün fişini çekin.
-
Cihazı bir aydan daha uzun bir süre (kullanmadan veya şarj etmeden)
saklayacaksanız pilinin en az %50 dolu olduğundan emin olun. Cihazı boş bir
pille saklamak, pil üzerinde geri dönüşü olmayan bir hasara yol açabilir.
-
Tehlikeye neden olabileceği için motorlu başlığın, diğer cihazların elektrik
kabloları veya başka kablolar üzerinden geçmesine izin vermeyin.
-
Sabitlenmemiş kumaş, saç ve vücudunuzu motorlu fırçalardan uzak tutun.
-
Cihaz çalışırken havalandırma deliklerini kapatmayın veya tıkamayın.
-
Bu elektrikli süpürge sadece evde kullanım için tasarlanmıştır. Bu elektrikli
süpürgeyi inşaat atıkları, çimento tozu, kül, ince kum, kireç ve benzer
maddeleri çekmek için kullanmayın. Elektrikli süpürgeyi filtre olmadan
kesinlikle kullanmayın. Bu, motorun zarar görmesine ve elektrikli süpürgenin
kullanım ömrünün azalmasına neden olabilir. Elektrikli süpürgenin tüm
parçalarını her zaman kullanım kılavuzunda gösterilen şekilde temizleyin.
Kullanım kılavuzunda özellikle gösterilmediği takdirde herhangi bir parçayı su
ve/veya temizlik maddeleri ile temizlemeyin.
-
Cihazı sadece verilen adaptör ile şarj edin. Sadece 25V'luk ZD12D250050
adaptörü veya 30V'luk ZD12D300050 adaptörü kullanın.
-
Ürünü 5 °C ila 40 °C arası sıcaklıklarda şarj edin, kullanın ve saklayın.
-
Pillerin ısınmasını veya zehirli ya da tehlikeli madde açığa çıkarmasını önlemek
için ürünü veya pili açmayın, delmeyin, sökmeyin, değişiklik yapmayın veya
hasar görmemesini sağlayın. Pillere kısa devre, aşırı yükleme veya tersine
yükleme yapmayın.
-
Ürün ve pilleri ateşten uzak tutun, doğrudan güneş ışığına veya yüksek
sıcaklığa maruz bırakmayın.
-
Ürün aşırı ısınırsa veya üründen koku gelirse, renk değiştirirse ya da şarj işlemi
her zamankinden daha uzun sürerse ürünü kullanmayı ve şarj etmeyi bırakıp
Philips ile iletişime geçin.
-
Ürünleri ve pillerini mikrodalga fırına ya da endüksiyonlu pişiricilerin üstüne
koymayın.
-
Hasarlı veya sızdıran pillerin cilde ya da göze temas etmemesine dikkat edin.
Bu durumda, hiç vakit kaybetmeden temas yerini suyla iyice yıkayın ve bir
doktora başvurun.
-
Bu üründe şarj edilebilir pil bulunur. Pil yalnızca kalifiye servis mühendislerince
değiştirilebilir.
-
Şarj edilebilir pili artık yeniden şarj edemiyorsanız veya gücü hızlı bir şekilde
bitiyorsa cihazı yetkili bir Philips servisine götürün.
-
Cihazın zarar görmesini önlemek için, toz haznesi içinde filtre yoksa cihazı
kullanmayın.
Dikkat
-
Şarj sırasında adaptör ısınır. Bu durum normaldir.
-
Elleriniz ıslakken cihazın fişini prize takmayın, prizden çıkarmayın veya cihazı
kullanmayın.
-
Adaptörü kablosundan çekerek prizden ayırmayın (Şek. 1). Şarj etmek için
şarj istasyonunu kullanmadığınızda cihazın fişini daima cihazın alt tarafındaki
manyetik şarj diskini çıkardıktan sonra çekin (Şek. 2).
-
Cihazı kullandıktan sonra ve şarj etmeden önce mutlaka kapatın.
-
Vakumlama sırasında hava deliklerini kapamayın.
-
Toz haznesini ve toz haznesi kapağını bulaşık makinesinde temizlemeyin. Bu
parçalar bulaşık makinesinde yıkanmaz.
-
Malzemeye zarar vermemek için, filtrenin beyaz kısmını normal bir elektrikli
süpürge veya fırçayla temizlemeyin.
-
Elektrikli süpürgeyi her zaman filtresi takılı olarak kullanın.
-
Yıkanabilir sünger filtreyi suyla temizlerken, filtre yuvasına ve toz haznesine
geri takmadan önce tamamen kuru olduğundan emin olun. Sünger filtreyi
doğrudan güneş ışığı altında, radyatör üzerinde veya çamaşır kurutma
makinesinde kurutmayın. Filtre yuvasını suyla temizlemeyin. Bu parça
yıkanamaz.
-
Filtreyi artık düzgün bir şekilde temizlenemiyorsa veya hasar görmüşse (bk.
„Aksesuarların sipariş edilmesi") değiştirin.
-
Cihazın, kullanım talimatlarına uygun şekilde duvara monte şarj istasyonu ile
birlikte takıldığından emin olun.
-
Başka üreticilere ait olan veya Philips tarafından özellikle tavsiye edilmeyen
aksesuar ve parçaları kesinlikle kullanmayın. Buna benzer aksesuar veya
parçalar kullandığınızda garantiniz geçersiz olur.
-
Şarj istasyonunu monte etmek için duvara delikler açarken elektrik çarpması
riskine karşı dikkatli olun.
Elektromanyetik alanlar (EMF)
Bu Philips cihazı, elektromanyetik alanlara maruz kalmaya ilişkin geçerli
standartlara ve düzenlemelere uygundur.
Aksesuarların sipariş edilmesi
Aksesuar veya yedek parça satın almak için www.philips.com/parts-and-
accessories adresini ziyaret edin ya da Philips bayinize gidin. Ülkenizdeki Philips
Müşteri Hizmetleri Merkezi ile de iletişim kurabilirsiniz (iletişim bilgileri için
uluslararası garanti belgesine göz atın).
Garanti ve destek
Versuni, satın alındıktan sonra bu ürün için iki yıl garanti vermektedir. Hatalı
kullanım veya yetersiz bakım nedeniyle meydana gelecek kusurlar garanti
kapsamı dışındadır. Bu garanti, bir tüketici olarak yasalar kapsamında sunulan
haklarınızı etkilemez. Daha fazla bilgi edinmek veya garantiyi kullanmak için
lütfen www.philips.com/support adresindeki web sitemizi ziyaret edin.
Geri dönüşüm
-
Bu simge, elektrikli ürün ve pillerin normal ev atıklarıyla birlikte atılmaması
gerektiğini belirtir (Şek. 3).
-
Ülkenizde elektrikli ürün ve pillerin ayrı olarak toplanmasına ilişkin yürürlükte
olan yönetmelikleri izleyin.
Dâhilî şarj edilebilir pili çıkarma
Cihaz atıldığında dâhilî şarj edilebilir pilin yalnızca bir uzman tarafından
çıkarılması gerekir. Pili çıkarmadan önce cihazı prizden çıkardığınızdan ve pilin
tamamen boş olduğundan emin olun.
Cihazı açmak için araçlar kullanırken ve şarj edilebilir pili çöpe atarken
tüm gerekli güvenlik önlemlerini alın.
Pillere dokunurken ellerinizin, ürünün ve pillerin kuru olmasına dikkat
edin.
Çıkarıldıktan sonra pillerin kazara kısa devre yapmasını önlemek için
pil üzerindeki terminallerin metal nesnelere (bozuk para, toka, yüzük
vb.) temas etmemesine çok dikkat edin. Pilleri alüminyum folyoya
sarmayın. Atmadan önce pil terminallerini bantla kapatın veya pilleri
bir plastik torbaya koyun.
Şarj edilebilir pili çıkarmak için aşağıdaki talimatları uygulayın.
1 Cihazın fişini prizden çekin ve motor durana kadar cihazı çalıştırın.
2 Toz haznesini cihazdan çıkarın (Şek. 4).
3 Pil yuvasını cihaz muhafazasına sabitleyen üç vidayı sökün (Şek. 5).
Pil yuvasını cihazdan dışarıya doğru çekin (Şek. 6).
Sorun giderme
Bu bölümde, cihazla ilgili en sık karşılaşabileceğiniz sorunlar özetlenmektedir.
Sorunu aşağıda verilen bilgileri kullanarak çözemiyorsanız sık sorulan sorular
listesi için www.philips.com/support adresini ziyaret edin veya ülkenizdeki
Müşteri Destek Merkezi ile iletişim kurun.
Sorun
Olası neden
Çözüm
Cihaz, düğmeye
Pil bittiğinde ekranda
Pili şarj etmek için, cihazı şarj
bastığımda
'00' sayısı yanıp söner.
standına bağlayın veya elektrikli
çalışmıyor.
el süpürgesini doğrudan şarj
standı üzerindeki mıknatısa
takın.
Cihazı çalıştırmak için
Çalıştırmak için sürgüyü iterek
sürgüyü ileri itmeniz
ayar 1'e getirin. Sürgüyü itip
gerekir.
ayar 2'ye getirerek emiş gücünü
daha da artırın veya en kirli
alanları en yüksek emiş gücünde
temizlemek için turbo ayarını
seçin.
Cihaz aniden
Bir sorun olduğunda
Cihazı şarj istasyonuna bağlayın
duruyor.
düğmeler yanıt
veya elektrikli el süpürgesini
vermez ve ekran boş
doğrudan şarj istasyonu
görünür.
üzerindeki mıknatısa takın.
Ekranı kontrol edin. Cihaz şarj
olmaya başladıktan sonra cihazı
her zamanki gibi kullanmaya
devam edebilirsiniz. Bir hata
kodu görüntülenirse kodun ne
anlama geldiğini bu broşürde
bulabilirsiniz (bk. "Hata kodları").
Cihazın emiş
Filtre ve siklon bölmesi
Filtreyi ve siklon bölmesini
gücünde azalma var.
kirlidir.
temizleyin. Sünger filtreyi
yıkamanız gerektiğini belirtmek
için birkaç saatlik kullanımdan
sonra filtre ışığı yanar. Cihazı
düzenli olarak kullanıyorsanız,
sünger filtreyi en az ayda bir
defa yıkadığınızdan emin olun.
Toz haznesi kapağını
Toz haznesi kapağını toz
toz haznesine düzgün
haznesine ve toz haznesini
biçimde takmadınız.
cihaza düzgün biçimde
Toz haznesini cihaza
taktığınızdan emin olun.
düzgün biçimde
takmadınız. Emiş gücü
her iki durumda da
azalacaktır.
Cihaz toz kaçırıyor.
Filtre kirlidir.
Filtreyi temizleyin.
Cihazda filtre yok.
Cihazda filtre olduğundan
ve filtrenin doğru şekilde
takıldığından emin olun.
Siklon bir nesneyle
Siklonun içinde sıkışan nesne
engelleniyor.
olup olmadığını kontrol edin ve
siklonu tıkayan nesneleri çıkarın.
Toz haznesinden
Toz haznesini boşaltın ve toz
toz düşerse, toz
haznesi kapağını doğru şekilde
haznesi kapağının toz
takın.
haznesine düzgün
biçimde takılmamış
olması muhtemeldir.
Cihaz halı
Çok yüksek bir emiş
Ayar 1'i seçerek emiş gücünü
temizlerken
gücü seçtiniz.
azaltın.
zeminde kolayca
hareket etmiyor.
Fırça artık
Fırça çok fazla dirençle
Fırçayı bir makas yardımıyla veya
dönmüyor.
karşılaşmıştır.
elle temizleyin.
Fırça uzun tüylü
Cihazı kapatın, ardından tekrar
halılarda çok yüksek
açın.
dirençle karşılaştığında
dönmeyi durdurabilir.
Temizlikten sonra
Döner fırçayı başlığın içine
döner fırçayı
düzgün biçimde kaydırmak ve
başlığa düzgün
kilitleme kolunu yerine oturtarak
yerleştirmediniz.
başlığın içinde sabitlemek için
kullanım kılavuzunun temizlik
bölümündeki talimatları izleyin.
XC7043: Başlıktaki
Başlığı cihaza veya el
Başlığı cihaza veya el
LED'ler yanmıyor.
süpürgesine düzgün
süpürgesine düzgün biçimde
biçimde takmadınız.
takın.
Cihaz şarj etmiyor.
Manyetik konnektör
Manyetik konnektörün
şarj diskine doğru
şarj diskine doğru şekilde
şekilde takılmamış
takıldığından ve adaptörün prize
veya adaptör prize
düzgün takıldığından emin olun.
düzgün takılmamış.
Doğru adaptörü ve
Doğru adaptörü ve kabloyu
kabloyu takmadınız.
taktığınızdan emin olun.
Yukarıdaki kontrolleri
yaptıysanız ve cihaz hala şarj
olmuyorsa, cihazı Philips servis
merkezine götürün veya Müşteri
Hizmetleri Merkezi ile iletişime
geçin.
XC7043: Mini
Döner fırça tıkanmış.
Fırçadaki kılları bir makas
turbo fırça düzgün
yardımıyla temizleyin (bkz.
çalışmıyor.
kullanma kılavuzu).
Döner fırça temizleme
Mini turbo fırçayı zeminle aynı
sırasında kumaş veya
hizada tutun ve turbo fırçayı
zemin nedeniyle
yumuşak zeminlere bastırmayın.
tıkanmıştır.
Mini turbo fırça
Mini turbo fırçanın üst ve
tamamen kapalı
alt kısımlarının bağlantısının
değildir.
düzgün yapıldığından ve
iki parça arasında boşluk
olmadığından emin olun.
Kilitleme halkasının kapalı
konumunda olup olmadığını
kontrol edin (bkz. kullanım
kılavuzu).
Elektrikli süpürgeyi
Elektrikli süpürgenizde
Boruyu sık sık odadaki diğer
kullanırken
statik elektrik
metal nesnelere değdirerek
bazen statik
birikebilir. Havadaki
cihaz yükünü boşaltın (örneğin,
elektrik çarpması
nem ne kadar düşük
masanın veya sandalyenin
hissediyorum.
olursa cihazlarda
ayakları vb.). Ayrıca odadaki nem
biriken statik elektrik o
seviyesini de artırabilirsiniz.
kadar yüksek olur.
İnce kum, kireç vb.
Toz haznesini boşaltın ve
maddeler süpürdünüz.
filtreyi kullanım kılavuzundaki
Bu da statik
talimatlara göre temizleyin.
elektriklenmeye yol
açar.
Hata kodları
Hata kodu
Anlamı
E1
Cihazı 5°C'nin altında sıcaklıkta saklanıyor veya şarj ediliyor.
Cihazı daha sıcak bir odaya alın. Cihazı 5°C'nin altında veya
40°C'nin üzerinde sıcaklıkta saklamayın.
E4
Motorlu zemin başlığı veya mini turbo fırça içindeki döner
fırça tıkandı ve serbestçe dönemiyor. Cihazı kapatın ve döner
fırçada tıkanıklık olup olmadığını kontrol edin.
E6
Adaptörden akım geçmiyor. Adaptörün prize düzgün takılıp
takılmadığını kontrol edin. Adaptör düzgün takıldıysa ve şarj
diski (mıknatıs) doğru şekilde takıldıysa ve cihaz şarj etmeye
başlamıyorsa, cihaz arızalı olabilir. Bu durumda, lütfen
Müşteri Destek Merkezi ile iletişime geçin veya cihazı yetkili
bir Philips servis merkezine götürün.
E7
Yanlış adaptör kullanıyorsunuz. Doğru adaptörü takın. Doğru
adaptör çalışmıyorsa, lütfen Müşteri Destek Merkezi ile
iletişime geçin veya cihazı yetkili bir Philips servis merkezine
götürün.
SE
Lütfen cihazı yetkili bir Philips servis merkezine götürün.

Advertisement

loading

Summary of Contents for Philips SpeedPro Max XC7040

  • Page 1 To buy accessories or spare parts, visit www.philips.com/parts-and-accessories The appliance is stored or charged at a temperature below or go to your Philips dealer. You can also contact the Philips Consumer Care Cihazı çalıştırmak için Çalıştırmak için sürgüyü iterek 5°C.
  • Page 2 XC7043 www.philips.com/support XC7043 XC7043 www.philips.com/support XC7043 XC7043 XC7040 www.philips.com/support XC7043 140-150 cm Max. 40 C Min. 5 C www.philips.com/support FC5005 CP0667/01 5 hrs. www.philips.com/support XC7043 F C 5 0 www.philips.com/support...

This manual is also suitable for:

Speedpro max xc7043