!0M7MDE
PVM-20M7MDE
!
-----------
I
-58-
VIDE-V15008 / DRUCK10
PVM-20M7MDE
6-3. CIRCUIT BOARDS LOCATION
H
6-4. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS
Note:
• All capacitors are in µf unless otherwise noted. pF: µµF 50WV or
less are not indicated except for electrolytics.
• All electrolytics are in 50V unless otherwise specified.
• All resistors are in ohms, 1/4W in resistance, 1/10W in chip
resistance.
kn=:1000O, Mr.!=1000kQ
• m- :
nonflammable resistor.
•~:fusibleresistor.
,6.
;
internal component.
• [===:J:
panel designation and adjustment for repair.
• All variable and adjustable resistors have characteristic curve B,
unless otherwise noted.
• All voltage are in V.
, Voltage are de with respect to ground unless otherwise noted.
• Readings are taken with a color-bar signal
input
• Voltage variations may be noted due to normal production
tolerances.
•-:B+bus.
• •••:
B-bus.
•-+:
Slgnatpath.
• No mark : with PAL color-bar signal
is
received or common voltage.
• For the respective voltage ratings in NTSC 3.58, S-VIDEO and
ANALOG RGB
modes, see the
table.
-59-
Reference information
RESISTOR : RN
METAL FILM
COIL
: RC
SOLID
: FPRD
NONFLAMMABLE CARBON
: FUSE
NONFLAMMABLE FUSIBLE
: RW
NONFLAMMABLE WIREWOUND
: RS
NONFLAMMABLE METAL OXIDE
: RB
NONFLAMMABLE CEMENT
:LF-SL
MICRO INDUCTOR
CAPACITOR TA
TANTALUM
PS
SlYROL
pp
POLYPROPYLENE
PT
MYLAR
MPS
METALIZED POLYESTER
MPP
METALIZED POLYPROPYLENE
ALB
BIPOLAR
ALT
HIGH TEMPERATURE
ALR
HIGH RIPPLE