R volution PlayerOne Quick Start Manual page 15

External
Drives
If you are using an
external HDD 2.5'',
please use the USB
cable provided with
your HDD for best
performance.
Using Internal Drive
To insert the internal 3.5'' SATA HDD, please open the rack door, then insert the drive into the internal
enclosure until 3/4, then complete the installation by closing the door. This operation will complete the
installation of the disk into the rack. The media player is compatible with drives formatted in FAT16/-
FAT32 (read-write), EXT2/EXT3/EXT4 (read-write), NTFS (read-write), exFAT (read-write), HFS/HFS+
(Mac OS Standard/Extended) (read-only), BTRFS (read-write). It is possible to format your hard drive via
Explorer via Menu / Format.
More info: rvolution.uservoice.com/knowledgebase
Pre-formated HDDs are
available on sale here:
http://rvolution.store
Using SD / MMC Memory Cards
To use a memory card, insert it in the memory card slot located on the left side of the media player. It will be
detected as USB device (USB icon on the home page). Some SD memory cards may not be recognized by
the player or may work incorrectly ; in such case, please use a different model of memory card.
Connecting USB Drives
You can connect your USB drives to one of the
available USB ports. If you want to play video files,
USB 2.0 is enough to support very high bitrate (up
to 480 Mbps) and more reliable than USB 3.0. If
you want to transfer files, you can use the USB 3.1
or USB Type-C ports.
Note: A dedicated USB icon located on the
home page can help you detect if the drive is
properly connected.
Power provided by USB ports may not be
enough to allow the USB drive to function
correctly; depending on the drive. Please do not
disconnect or switch off the USB drive during
External HDD
write (copy / transfer) operations.
The player is compatible with UASP HDD
docking stations as well as USB hubs.
Player
Front View
Open the tray and insert the HDD,
keeping the connectors inside the bay.
13