IMPORTANT: PLEASE READ AND FOLLOW •Before beginning, please read these instructions completely and carefully. •The installer should leave these instructions with the consumer for future reference. •Viking mult-use chambers are not compatible with Viking Convection Microwaves GENERAL INFORMATION 1. All openings in the wall behind the appliance and under the appliance shall be sealed. 2.
VMWC102 - 29 1/2” (80.0 cm) VMWC162 - 35 1/4” (89.5 cm) BASIC DIMENSIONS (Designer Models) DMWC171-26 1/2” (67.3 cm) DMWC101-29 1/2” (74.9 cm) IKING *Adjust trim to door by loosening screws on all four sides of trim to achieve proper spacing (9/16”...
CABINET CUTOUT (Professional and Designer Models) Recommended Electrical Outlet Location 10” (25.4 cm) CABINET MOUNTING - (Professional and Designer Models) Place the multi-use chamber in the cabinet cut-out. Use the four enclosed screws to attach unit to the cabinet. The adjustment brackets are used to adjust how far the microwave slides back into the chamber.
If you are unable to obtain the name of an authorized serice agency, or if you continue to have service problems, contact Viking Range Corporation at (662) 451-4133 or write to: Record the following information indicated below. You will need it if service is ever required.
(12) months from the date of original retail purchase. Viking Range Corporation, warrantor, agrees to repair or replace, at its option, any part which fails or is found to be defective during the warranty period.
Page 8
Viking Range Corporation 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For more product information call 1-888-VIKING1 (845-4641), or visit the Viking Web site vikingrange.com F20003G (PS0206VR)