Bluetooth Operation - prime3 APS91 Owner's Manual

APS91
Battery use:
1. When the battery is out of power or the battery is low, please charge it as soon as possible. If it is not
charged for a long time, the battery's internal storage capacity will be reduced, which will make it unable
to be fully charged or shortened operation time.
2. Do not charge the battery for more than 24 hours. Over-discharging or overcharging shortens the life
of the battery. Repeated charging and discharging affect the battery life as well as the playback time.
Playing time cannot be guaranteed under all conditions. Variable battery life cannot be the basis for a
warranty claim.
3. The battery icon which locates on the right bottom corner of display cannot represent the battery power
capacity accurately due to dynamically consumption. When the rst grid disappears, it probably has
consumed 60~80% battery power.
4. When the battery die, the unit can normal work with AC power.

Bluetooth operation

The speaker includes Bluetooth function which allows you to wireless playback the audio with other
Bluetooth device like smart phone etc. Please follow up below for the operation:
1. Power on the unit, press the mode button repeatedly enter to Bluetooth mode, and the display will show "
BLUE".
2. Enable the Bluetooth function on your Bluetooth device, and search the available Bluetooth devices
(please reference your device manual for the operation).
3. Check the available Bluetooth device on the menu list of your device, and select " P3_THUNDER" to start
pairing. Please key in "0000" (4 zero) in case a password is required during pairing.
4. Select and play the music on your Bluetooth device. Then the sound will output from the speaker.
5. Press the previous/next button to switch playing track; rotate the volume+/- knob to increase or decrease
the volume; press the play/pause button to play or pause music;
Bluetooth TWS(true wireless stereo output): In case you have two products on hand, place the units near
each other(less than 10 meters); power on and switch to Bluetooth mode on both units. Press and hold(3
seconds) the TWS button choose and turn on TWS mode on one unit as a master speaker, The display will
show " T ON" and Bluetooth logo ashing; then the unit will auto pair with another speaker after a while. The
Bluetooth logo on display becomes stable which means the unit paired with another one is successful.
Search and pair with the speaker following the above Bluetooth operation, and select the music for playing.
Then you can get the sound output from both speakers. Press and hold the TWS button on either speaker
can turn off the TWS mode.
Important:
The TWS playback is only available in Bluetooth mode. You need to turn on and pair the TWS again in case
the power is off and on, switch the play mode, and back.
In TWS mode, you can adjust the volume, etc. on one unit, but control the output on both speakers.
There may be small background noise in TWS playback mode which is normal due to wireless signal
transmission, it is out of our service.
Please try to follow up above operation for the TWS pair again in case you fail.
Notes:
a. All Bluetooth devices are not guaranteed to pair successfully due to different designs and brands.
b. The Bluetooth's best working distance is within 10 meters without any obstacle in between.
FM radio operation
Before listen to the radio, please try to move the unit next to the window as you can in order to get better
reception.
9